Bolt pattern, center bore, factory wheel sizes for each submodel and the aftermarket widths and offsets that bolt on to the Chevrolet HHR built from 2006 to 2011 (LS, LT, LS Panel, LT Panel, SS).
Every 2006-2011 Chevrolet HHR uses a 5X110 bolt pattern with a 65.1 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 65.1 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M12x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.
US-market submodels of the Chevrolet HHR (1st Gen) and the model years each was sold. All of them share the 5X110 bolt pattern.
| Submodel | Years | Factory wheel sizes |
|---|---|---|
| LS | 2006-2011 | 16x6.5 +41 |
| LT | 2006-2011 | 16x6.5 +41 |
| LS Panel | 2008-2011 | See factory sizes below |
| LT Panel | 2008-2011 | See factory sizes below |
| SS | 2008-2010 | See factory sizes below |
Wheel sizes Chevrolet fitted to the 2006-2011 Chevrolet HHR from the factory (all submodels; the table above lists them by submodel). Offsets are ET in millimeters.
| Factory size |
|---|
| 16x6.5 +41 |
| 17x6.5 +42 |
| 17x7 +38 |
Widths and offsets with Verified Fitment on the 2006-2011 Chevrolet HHR: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.
| Diameter | Width | Offset range |
|---|---|---|
| 16-18" | 6.5" | +11 to +51 |
| 16-18" | 7" | +17 to +47 |
| 16-18" | 7.5" | +24 to +40 |
| 16-18" | 8" | +30 to +34 |
The 2006-2011 Chevrolet HHR (1st Gen) uses a 5X110 bolt pattern and a 65.1 mm center bore.
Factory sizes: 16x6.5 +41; 17x6.5 +42; 17x7 +38.
Its wheel fasteners use a M12x1.5 thread.
Bolt-on sizes run from 16" to 18" in diameter; see the size table for the offset range at each width.