Bolt pattern, center bore, factory wheel sizes for each submodel and the aftermarket widths and offsets that bolt on to the Chevrolet Impala built from 1994 to 1996.
Every 1994-1996 Chevrolet Impala uses a 5X127 bolt pattern with a 78.3 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 78.3 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M12x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.
US-market submodels of the Chevrolet Impala (B-body) and the model years each was sold. All of them share the 5X127 bolt pattern.
| Submodel | Years | Factory wheel sizes |
|---|---|---|
| SS | 1994-1996 | 17x8.5 +6 |
Wheel sizes Chevrolet fitted to the 1994-1996 Chevrolet Impala from the factory (all submodels; the table above lists them by submodel). Offsets are ET in millimeters.
| Factory size |
|---|
| 17x8.5 +6 |
Widths and offsets with Verified Fitment on the 1994-1996 Chevrolet Impala: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.
| Diameter | Width | Offset range |
|---|---|---|
| 17-20" | 8.5" | -11 to +11 |
| 17-20" | 9" | -5 to +5 |
Wider still: 17x10 -13 to -2; 18x10 -13 to -2; 19x10 -13 to -2; 20x10 -13 to -2 fit with modifications (roll rear quarter-panel lips, check front tire-to-frame/tie-rod clearance at full lock, hub-centric rings for aftermarket wheels).
The 1994-1996 Chevrolet Impala (B-body) uses a 5X127 bolt pattern and a 78.3 mm center bore.
Factory sizes: 17x8.5 +6.
Its wheel fasteners use a M12x1.5 thread.
Bolt-on sizes run from 17" to 20" in diameter; see the size table for the offset range at each width.