Chevrolet K1500 (GMT400) 1988-1998 Wheel Fitment Guide

Bolt pattern, center bore, factory wheel sizes and the aftermarket widths and offsets that bolt on to the Chevrolet K1500 built from 1988 to 1998 (Cheyenne, Scottsdale, Silverado, WT).

Fitment specs

Bolt pattern6X139.7
Center bore78.1 mm
Lug threadM14x1.5
Model years1988-1998
GenerationGMT400

Every 1988-1998 Chevrolet K1500 uses a 6X139.7 bolt pattern with a 78.1 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 78.1 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M14x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.

Years & submodels

US-market submodels of the Chevrolet K1500 (GMT400) and the model years each was sold. All of them share the 6X139.7 bolt pattern.

SubmodelYears
Cheyenne1988-1998
Scottsdale1988-1994
Silverado1988-1998
WT1990-1998

Factory wheel sizes

Wheel sizes Chevrolet fitted to the 1988-1998 Chevrolet K1500 from the factory. Offsets are ET in millimeters.

Factory size
16x6.5 +44
16x6.5 +50
16x7 +44

Aftermarket sizes that bolt on

Widths and offsets with Verified Fitment on the 1988-1998 Chevrolet K1500: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.

DiameterWidthOffset range
15-20"7"+27 to +49
15-20"7.5"+33 to +43

Wider still: 15x8.5 +25 to +36; 16x8.5 +25 to +36; 17x8.5 +25 to +36; 18x8.5 +25 to +36; 19x8.5 +25 to +36; 20x8.5 +25 to +36 fit with modifications (torsion-bar / front leveling for larger tires (4wd), trim front bumper valance and inner fender liner, hub-centric rings for aftermarket wheels).

FAQ

What is the bolt pattern of the 1988-1998 Chevrolet K1500?

The 1988-1998 Chevrolet K1500 (GMT400) uses a 6X139.7 bolt pattern and a 78.1 mm center bore.

What size wheels came on the 1988-1998 Chevrolet K1500 from the factory?

Factory sizes: 16x6.5 +44; 16x6.5 +50; 16x7 +44.

What lug thread size does the 1988-1998 Chevrolet K1500 use?

Its wheel fasteners use a M14x1.5 thread.

What aftermarket wheel sizes fit the 1988-1998 Chevrolet K1500 without modifications?

Bolt-on sizes run from 15" to 20" in diameter; see the size table for the offset range at each width.