Bolt pattern, center bore, factory wheel sizes and the aftermarket widths and offsets that bolt on to the Chevrolet SSR built from 2003 to 2006.
Every 2003-2006 Chevrolet SSR uses a 6X127 bolt pattern with a 78.3 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 78.3 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M12x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.
US-market submodels of the Chevrolet SSR (GMT368) and the model years each was sold. All of them share the 6X127 bolt pattern.
| Submodel | Years |
|---|---|
| Base | 2003-2006 |
Wheel sizes Chevrolet fitted to the 2003-2006 Chevrolet SSR from the factory. Offsets are ET in millimeters.
| Factory size |
|---|
| 19x8 +32 front / 20x10 +14 rear |
Widths and offsets with Verified Fitment on the 2003-2006 Chevrolet SSR: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.
| Diameter | Width | Front offset | Rear offset |
|---|---|---|---|
| 19-21" | 8" | +15 to +37 | — |
| 19-21" | 8.5" | +21 to +31 | — |
| 19-21" | 10" | — | -3 to +20 |
| 19-21" | 10.5" | — | +3 to +13 |
Wider still: 19x11.5 front — / rear -5 to +6; 20x11.5 front — / rear -5 to +6; 21x11.5 front — / rear -5 to +6 fit with modifications (roll front and rear fender lips, trim front inner fender liner if it rubs at full lock, hub-centric rings for aftermarket wheels).
The 2003-2006 Chevrolet SSR (GMT368) uses a 6X127 bolt pattern and a 78.3 mm center bore.
Factory sizes: 19x8 +32 front / 20x10 +14 rear.
Its wheel fasteners use a M12x1.5 thread.
Bolt-on sizes run from 19" to 21" in diameter; see the size table for the offset range at each width.