Bolt pattern, center bore, factory wheel sizes and the aftermarket widths and offsets that bolt on to the Chevrolet Suburban C1500 2WD built from 1992 to 1999 (Cheyenne, Silverado, Base, LS, LT).
Every 1992-1999 Chevrolet Suburban C1500 2WD uses a 5X127 bolt pattern with a 78.3 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 78.3 mm inner diameter so the wheel centers on the hub instead of the lugs. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.
US-market submodels of the Chevrolet Suburban C1500 2WD (GMT400) and the model years each was sold. All of them share the 5X127 bolt pattern.
| Submodel | Years |
|---|---|
| Cheyenne | 1992-1994 |
| Silverado | 1992-1994 |
| Base | 1995-1999 |
| LS | 1995-1999 |
| LT | 1995-1999 |
Wheel sizes Chevrolet fitted to the 1992-1999 Chevrolet Suburban C1500 2WD from the factory. Offsets are ET in millimeters.
| Factory size |
|---|
| 15x7 +0 |
| 15x7 +13 |
Widths and offsets with Verified Fitment on the 1992-1999 Chevrolet Suburban C1500 2WD: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.
| Diameter | Width | Offset range |
|---|---|---|
| 15-17" | 7" | -4 to +19 |
| 15-17" | 7.5" | +2 to +12 |
Wider still: 15x8.5 -6 to +5; 16x8.5 -6 to +5; 17x8.5 -6 to +5 fit with modifications (torsion-bar / front leveling for larger tires (4wd), trim front bumper valance and inner fender liner, hub-centric rings for aftermarket wheels).
The 1992-1999 Chevrolet Suburban C1500 2WD (GMT400) uses a 5X127 bolt pattern and a 78.3 mm center bore.
Factory sizes: 15x7 +0; 15x7 +13.
Bolt-on sizes run from 15" to 17" in diameter; see the size table for the offset range at each width.