Chevrolet Tahoe (K2XX) 2015-2020 Wheel Fitment Guide

Bolt pattern, center bore, factory wheel sizes for each submodel and the aftermarket widths and offsets that bolt on to the Chevrolet Tahoe built from 2015 to 2020 (LS, LT, RST, LTZ, Premier).

Fitment specs

Bolt pattern6X139.7
Center bore78.1 mm
Lug threadM14x1.5
Model years2015-2020
GenerationK2XX

Every 2015-2020 Chevrolet Tahoe uses a 6X139.7 bolt pattern with a 78.1 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 78.1 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M14x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.

Years & submodels

US-market submodels of the Chevrolet Tahoe (K2XX) and the model years each was sold. All of them share the 6X139.7 bolt pattern.

SubmodelYearsFactory wheel sizes
LS2015-202018x8.5 +24
LT2015-202018x8.5 +24
RST2018-2020See factory sizes below
LTZ201520x9 +27
Premier2016-202020x9 +27

Factory wheel sizes

Wheel sizes Chevrolet fitted to the 2015-2020 Chevrolet Tahoe from the factory (all submodels; the table above lists them by submodel). Offsets are ET in millimeters.

Factory size
18x8.5 +24
20x9 +27
22x9 +24

Aftermarket sizes that bolt on

Widths and offsets with Verified Fitment on the 2015-2020 Chevrolet Tahoe: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.

LS, LT

DiameterWidthOffset range
18-22"8.5"+12 to +30
18-22"9"+18 to +24

Wider still: 18x9.5 +6 to +18; 18x10 +12; 19x9.5 +6 to +18; 19x10 +12; 20x9.5 +6 to +18; 20x10 +12… fit with modifications (roll the fender lips, add negative camber (camber bolts or arms), wheel alignment after install).

RST

DiameterWidthOffset range
17-22"8.5"+7 to +33
17-22"9"+13 to +27

Wider still: 17x9.5 +1 to +21; 17x10 +7 to +15; 18x9.5 +1 to +21; 18x10 +7 to +15; 19x9.5 +1 to +21; 19x10 +7 to +15… fit with modifications (roll the fender lips, add negative camber (camber bolts or arms), wheel alignment after install).

LTZ, Premier

DiameterWidthOffset range
20-22"9"+18 to +27

Wider still: 20x9.5 +6 to +20; 20x10 +12 to +14; 21x9.5 +6 to +20; 21x10 +12 to +14; 22x9.5 +6 to +20; 22x10 +12 to +14… fit with modifications (roll the fender lips, add negative camber (camber bolts or arms), wheel alignment after install).

Wheels in stock that fit

In-stock PG WHEELS sets in sizes with Verified Fitment for the 2015-2020 Chevrolet Tahoe. Each card shows only the sizes that fit; prices are for a set of 4 with free shipping in the lower 48.

LS, LT

RST

LTZ, Premier

FAQ

What is the bolt pattern of the 2015-2020 Chevrolet Tahoe?

The 2015-2020 Chevrolet Tahoe (K2XX) uses a 6X139.7 bolt pattern and a 78.1 mm center bore.

What size wheels came on the 2015-2020 Chevrolet Tahoe from the factory?

Factory sizes: 18x8.5 +24; 20x9 +27; 22x9 +24.

What lug thread size does the 2015-2020 Chevrolet Tahoe use?

Its wheel fasteners use a M14x1.5 thread.

What aftermarket wheel sizes fit the 2015-2020 Chevrolet Tahoe without modifications?

Bolt-on sizes run from 17" to 22" in diameter; see the size table for the offset range at each width.