Bolt pattern, center bore, factory wheel sizes and the aftermarket widths and offsets that bolt on to the Chevrolet Tracker built from 1999 to 2004 (4-Door, Convertible, LT, ZR2).
Every 1999-2004 Chevrolet Tracker uses a 5X139.7 bolt pattern with a 108.1 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 108.1 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M12x1.25. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.
US-market submodels of the Chevrolet Tracker (2nd Gen) and the model years each was sold. All of them share the 5X139.7 bolt pattern.
| Submodel | Years |
|---|---|
| 4-Door | 1999-2004 |
| Convertible | 1999-2003 |
| LT | 2001-2004 |
| ZR2 | 2001-2004 |
Wheel sizes Chevrolet fitted to the 1999-2004 Chevrolet Tracker from the factory. Offsets are ET in millimeters.
| Factory size |
|---|
| 15x5.5 +26 |
Widths and offsets with Verified Fitment on the 1999-2004 Chevrolet Tracker: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.
| Diameter | Width | Offset range |
|---|---|---|
| 15-17" | 5.5" | +9 to +31 |
| 15-17" | 6" | +15 to +25 |
Wider still: 15x7 +7 to +18; 16x7 +7 to +18; 17x7 +7 to +18 fit with modifications (torsion-bar / front leveling for larger tires (4wd), trim front bumper valance and inner fender liner, hub-centric rings for aftermarket wheels).
The 1999-2004 Chevrolet Tracker (2nd Gen) uses a 5X139.7 bolt pattern and a 108.1 mm center bore.
Factory sizes: 15x5.5 +26.
Its wheel fasteners use a M12x1.25 thread.
Bolt-on sizes run from 15" to 17" in diameter; see the size table for the offset range at each width.