Chevrolet Trax 2nd Gen 2024-2026 Wheel Fitment Guide

Bolt pattern, center bore, factory wheel sizes and the aftermarket widths and offsets that bolt on to the Chevrolet Trax built from 2024 to 2026 (ACTIV, LS, LT, RS).

Fitment specs

Bolt pattern5X115
Center bore70.2 mm
Lug threadM12x1.5
Model years2024-2026
Generation2nd Gen

Every 2024-2026 Chevrolet Trax uses a 5X115 bolt pattern with a 70.2 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 70.2 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M12x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.

Years & submodels

US-market submodels of the Chevrolet Trax (2nd Gen) and the model years each was sold. All of them share the 5X115 bolt pattern.

SubmodelYears
ACTIV2024-2026
LS2024-2026
LT2024-2026
RS2024-2026

Factory wheel sizes

Wheel sizes Chevrolet fitted to the 2024-2026 Chevrolet Trax from the factory. Offsets are ET in millimeters.

Factory size
17x7.5 +35
17x7.5 +39
18x7.5 +40
19x8 +40

Aftermarket sizes that bolt on

Widths and offsets with Verified Fitment on the 2024-2026 Chevrolet Trax: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.

DiameterWidthOffset range
17-21"7.5"+17 to +45
17-21"8"+23 to +45
17-21"8.5"+29 to +39

Wider still: 17x9.5 +21 to +32; 18x9.5 +21 to +32; 19x9.5 +21 to +32; 20x9.5 +21 to +32; 21x9.5 +21 to +32 fit with modifications (roll fender lips, trim the plastic inner fender liner, hub-centric rings for aftermarket wheels).

FAQ

What is the bolt pattern of the 2024-2026 Chevrolet Trax?

The 2024-2026 Chevrolet Trax (2nd Gen) uses a 5X115 bolt pattern and a 70.2 mm center bore.

What size wheels came on the 2024-2026 Chevrolet Trax from the factory?

Factory sizes: 17x7.5 +35; 17x7.5 +39; 18x7.5 +40; 19x8 +40.

What lug thread size does the 2024-2026 Chevrolet Trax use?

Its wheel fasteners use a M12x1.5 thread.

What aftermarket wheel sizes fit the 2024-2026 Chevrolet Trax without modifications?

Bolt-on sizes run from 17" to 21" in diameter; see the size table for the offset range at each width.