Bolt pattern, center bore, factory wheel sizes for each submodel and the aftermarket widths and offsets that bolt on to the Chevrolet Uplander built from 2006 to 2009 (Base, LS, LT).
Every 2006-2009 Chevrolet Uplander uses a 6X115 bolt pattern with a 70.3 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 70.3 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M12x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.
US-market submodels of the Chevrolet Uplander and the model years each was sold. All of them share the 6X115 bolt pattern.
| Submodel | Years | Factory wheel sizes |
|---|---|---|
| Base | 2006 | 17x6.5 +52 |
| LS | 2006-2009 | 17x6.5 +52 |
| LT | 2006-2009 | 17x6.5 +52 |
Wheel sizes Chevrolet fitted to the 2006-2009 Chevrolet Uplander from the factory (all submodels; the table above lists them by submodel). Offsets are ET in millimeters.
| Factory size |
|---|
| 17x6.5 +52 |
Widths and offsets with Verified Fitment on the 2006-2009 Chevrolet Uplander: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.
| Diameter | Width | Offset range |
|---|---|---|
| 17-18" | 6.5" | +35 to +57 |
| 17-18" | 7" | +41 to +51 |
Wider still: 17x8 +33 to +44; 18x8 +33 to +44 fit with modifications (trim front inner fender liner, hub-centric rings for aftermarket wheels).
The 2006-2009 Chevrolet Uplander uses a 6X115 bolt pattern and a 70.3 mm center bore.
Factory sizes: 17x6.5 +52.
Its wheel fasteners use a M12x1.5 thread.
Bolt-on sizes run from 17" to 18" in diameter; see the size table for the offset range at each width.