Bolt pattern, center bore, factory wheel sizes and the aftermarket widths and offsets that bolt on to the Chevrolet Volt built from 2011 to 2015.
Every 2011-2015 Chevrolet Volt uses a 5X115 bolt pattern with a 70.3 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 70.3 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M12x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.
US-market submodels of the Chevrolet Volt (1st Gen) and the model years each was sold. All of them share the 5X115 bolt pattern.
| Submodel | Years |
|---|---|
| Base | 2011-2015 |
Wheel sizes Chevrolet fitted to the 2011-2015 Chevrolet Volt from the factory. Offsets are ET in millimeters.
| Factory size |
|---|
| 17x7 +38 |
Widths and offsets with Verified Fitment on the 2011-2015 Chevrolet Volt: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.
| Diameter | Width | Offset range |
|---|---|---|
| 17-18" | 7" | +21 to +44 |
| 17-18" | 7.5" | +27 to +37 |
Wider still: 17x8.5 +19 to +30; 18x8.5 +19 to +30 fit with modifications (roll front and rear fender lips, trim front inner fender liner if it rubs at full lock, hub-centric rings for aftermarket wheels).
The 2011-2015 Chevrolet Volt (1st Gen) uses a 5X115 bolt pattern and a 70.3 mm center bore.
Factory sizes: 17x7 +38.
Its wheel fasteners use a M12x1.5 thread.
Bolt-on sizes run from 17" to 18" in diameter; see the size table for the offset range at each width.