Chrysler 200 (JS) 2011-2014 Wheel Fitment Guide

Bolt pattern, center bore, factory wheel sizes for each submodel and the aftermarket widths and offsets that bolt on to the Chrysler 200 built from 2011 to 2014 (LX, Touring, Limited, S, Convertible).

Fitment specs

Bolt pattern5X114.3
Center bore67.1 mm
Lug threadM12x1.5
Model years2011-2014
GenerationJS

Every 2011-2014 Chrysler 200 uses a 5X114.3 bolt pattern with a 67.1 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 67.1 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M12x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.

Years & submodels

US-market submodels of the Chrysler 200 (JS) and the model years each was sold. All of them share the 5X114.3 bolt pattern.

SubmodelYearsFactory wheel sizes
LX2011-201417x6.5 +40
Touring2011-201417x6.5 +40
Limited2011-201417x6.5 +40
18x7 +40
S2011-201418x7 +40
Convertible2011-2014See factory sizes below

Factory wheel sizes

Wheel sizes Chrysler fitted to the 2011-2014 Chrysler 200 from the factory (all submodels; the table above lists them by submodel). Offsets are ET in millimeters.

Factory size
17x6.5 +40
18x7 +40
18x7.5 +40
19x7.5 +40
19x8 +40

Aftermarket sizes that bolt on

Widths and offsets with Verified Fitment on the 2011-2014 Chrysler 200: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.

LX, Touring, Limited, Convertible

DiameterWidthOffset range
17-19"6.5"+15 to +50
17-19"7"+21 to +51
17-19"7.5"+28 to +44
17-19"8"+34 to +38

S

DiameterWidthOffset range
18-19"7"+21 to +50
18-19"7.5"+28 to +44
18-19"8"+34 to +38

Wheels in stock that fit

In-stock PG WHEELS sets in sizes with Verified Fitment for the 2011-2014 Chrysler 200. Each card shows only the sizes that fit; prices are for a set of 4 with free shipping in the lower 48.

LX, Touring, Limited, Convertible

Modifications Required (roll front and rear fender lips, front camber bolts for added negative camber, trim front fender liner if it rubs at full lock)

S

Modifications Required (roll front and rear fender lips, front camber bolts for added negative camber, trim front fender liner if it rubs at full lock)

FAQ

What is the bolt pattern of the 2011-2014 Chrysler 200?

The 2011-2014 Chrysler 200 (JS) uses a 5X114.3 bolt pattern and a 67.1 mm center bore.

What size wheels came on the 2011-2014 Chrysler 200 from the factory?

Factory sizes: 17x6.5 +40; 18x7 +40; 18x7.5 +40; 19x7.5 +40; 19x8 +40.

What lug thread size does the 2011-2014 Chrysler 200 use?

Its wheel fasteners use a M12x1.5 thread.

What aftermarket wheel sizes fit the 2011-2014 Chrysler 200 without modifications?

Bolt-on sizes run from 17" to 19" in diameter; see the size table for the offset range at each width.