Chrysler 300 (LX) 2005-2010 Wheel Fitment Guide

Bolt pattern, center bore, factory wheel sizes for each submodel and the aftermarket widths and offsets that bolt on to the Chrysler 300 built from 2005 to 2010 (Base, Touring, Limited, LX, 300C, Signature Series).

Fitment specs

Bolt pattern5X115
Center bore71.5 mm
Lug threadM14x1.5
Model years2005-2010
GenerationLX

Every 2005-2010 Chrysler 300 uses a 5X115 bolt pattern with a 71.5 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 71.5 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M14x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.

Years & submodels

US-market submodels of the Chrysler 300 (LX) and the model years each was sold. All of them share the 5X115 bolt pattern.

SubmodelYearsFactory wheel sizes
Base2005-2010See factory sizes below
Touring2005-2010See factory sizes below
Limited2005-2010See factory sizes below
LX2009-201017x7 +22
300C2005-201018x7.5 +24
18x7.5 +55
20x8 +24
20x8 +50
20x9 +25.5
Signature Series2009-201017x7 +22

Factory wheel sizes

Wheel sizes Chrysler fitted to the 2005-2010 Chrysler 300 from the factory (all submodels; the table above lists them by submodel). Offsets are ET in millimeters.

Factory size
17x7 +22
18x7.5 +24
18x7.5 +55
19x7.5 +24
19x7.5 +50
20x8 +24
20x8 +50
20x9 +25.5
21x8.5 +20
21x8.5 +45
21x9.5 +20
22x9 +18
22x10 +15

Aftermarket sizes that bolt on

Widths and offsets with Verified Fitment on the 2005-2010 Chrysler 300: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.

Base, Touring, Limited

DiameterWidthOffset range
17-20"7"-4 to +32
17-20"7.5"+3 to +38
17-20"8"+9 to +45
17-20"8.5"+15 to +48

Wider still: 17x9 +5 to +47; 17x9.5 +12 to +41; 18x9 +5 to +47; 18x9.5 +12 to +41; 19x9 +5 to +47; 19x9.5 +12 to +41… fit with modifications (roll rear fender lips, check strut / spring clearance up front (spacer may be needed), rear fender roll or pull for wide, low-offset rear wheels).

LX, Signature Series

DiameterWidthOffset range
17-20"7"-4 to +32
17-20"7.5"+3 to +38
17-20"8"+9 to +45
17-20"8.5"+15 to +48

Wider still: 17x9 +5 to +47; 17x9.5 +12 to +41; 18x9 +5 to +47; 18x9.5 +12 to +41; 19x9 +5 to +47; 19x9.5 +12 to +41… fit with modifications (roll rear fender lips, check strut / spring clearance up front (spacer may be needed), rear fender roll or pull for wide, low-offset rear wheels).

300C

DiameterWidthOffset range
18-20"7.5"+3 to +34
18-20"8"+9 to +40
18-20"8.5"+15 to +47

Wider still: 18x9 +5 to +47; 18x9.5 +12 to +41; 19x9 +5 to +47; 19x9.5 +12 to +41; 20x9 +5 to +47; 20x9.5 +12 to +41 fit with modifications (roll rear fender lips, check strut / spring clearance up front (spacer may be needed), rear fender roll or pull for wide, low-offset rear wheels).

Wheels in stock that fit

In-stock PG WHEELS sets in sizes with Verified Fitment for the 2005-2010 Chrysler 300. Each card shows only the sizes that fit; prices are for a set of 4 with free shipping in the lower 48.

Base, Touring, Limited

Modifications Required (roll rear fender lips, check strut / spring clearance up front (spacer may be needed), rear fender roll or pull for wide, low-offset rear wheels)

LX, Signature Series

Modifications Required (roll rear fender lips, check strut / spring clearance up front (spacer may be needed), rear fender roll or pull for wide, low-offset rear wheels)

300C

Modifications Required (roll rear fender lips, check strut / spring clearance up front (spacer may be needed), rear fender roll or pull for wide, low-offset rear wheels)

FAQ

What is the bolt pattern of the 2005-2010 Chrysler 300?

The 2005-2010 Chrysler 300 (LX) uses a 5X115 bolt pattern and a 71.5 mm center bore.

What size wheels came on the 2005-2010 Chrysler 300 from the factory?

Factory sizes: 17x7 +22; 18x7.5 +24; 18x7.5 +55; 19x7.5 +24; 19x7.5 +50; 20x8 +24; 20x8 +50; 20x9 +25.5; 21x8.5 +20; 21x8.5 +45; 21x9.5 +20; 22x9 +18; 22x10 +15.

What lug thread size does the 2005-2010 Chrysler 300 use?

Its wheel fasteners use a M14x1.5 thread.

What aftermarket wheel sizes fit the 2005-2010 Chrysler 300 without modifications?

Bolt-on sizes run from 17" to 20" in diameter; see the size table for the offset range at each width.