Chrysler Crossfire (ZH) 2004-2008 Wheel Fitment Guide

Bolt pattern, center bore, factory wheel sizes and the aftermarket widths and offsets that bolt on to the Chrysler Crossfire built from 2004 to 2008 (Base, Limited, SRT-6).

Fitment specs

Bolt pattern5X112
Center bore66.6 mm
Lug threadM12x1.5
Model years2004-2008
GenerationZH

Every 2004-2008 Chrysler Crossfire uses a 5X112 bolt pattern with a 66.6 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 66.6 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M12x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.

Years & submodels

US-market submodels of the Chrysler Crossfire (ZH) and the model years each was sold. All of them share the 5X112 bolt pattern.

SubmodelYears
Base2004-2006
Limited2004-2008
SRT-62005-2006

Factory wheel sizes

Wheel sizes Chrysler fitted to the 2004-2008 Chrysler Crossfire from the factory. Offsets are ET in millimeters.

Factory size
18x7.5 +35
18x7.5 +35 front / 19x9 +22 rear
18x8 +35
19x8 +35 front / 20x9.5 +25 rear
19x8.5 +30 front / 20x10 +20 rear

Aftermarket sizes that bolt on

Widths and offsets with Verified Fitment on the 2004-2008 Chrysler Crossfire: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.

DiameterWidthFront offsetRear offset
18-19"7.5"+18 to +40-14 to +45
18-19"8"+24 to +34-8 to +40
18-19"8.5"—-1 to +34
18-19"9"—+5 to +27
18-19"9.5"—+11 to +21

Wider still: 18x10.5 front — / rear +3 to +14; 19x10.5 front — / rear +3 to +14 fit with modifications (roll rear fender lips, front camber plates or bolts for -1° or more, check strut and spring perch clearance (thin spacer if needed)).

Wheels in stock that fit

In-stock PG WHEELS sets in sizes with Verified Fitment for the 2004-2008 Chrysler Crossfire. Each card shows only the sizes that fit; prices are for a set of 4 with free shipping in the lower 48.

Modifications Required (roll rear fender lips, front camber plates or bolts for -1° or more, check strut and spring perch clearance (thin spacer if needed))

FAQ

What is the bolt pattern of the 2004-2008 Chrysler Crossfire?

The 2004-2008 Chrysler Crossfire (ZH) uses a 5X112 bolt pattern and a 66.6 mm center bore.

What size wheels came on the 2004-2008 Chrysler Crossfire from the factory?

Factory sizes: 18x7.5 +35; 18x7.5 +35 front / 19x9 +22 rear; 18x8 +35; 19x8 +35 front / 20x9.5 +25 rear; 19x8.5 +30 front / 20x10 +20 rear.

What lug thread size does the 2004-2008 Chrysler Crossfire use?

Its wheel fasteners use a M12x1.5 thread.

What aftermarket wheel sizes fit the 2004-2008 Chrysler Crossfire without modifications?

Bolt-on sizes run from 18" to 19" in diameter; see the size table for the offset range at each width.