Bolt pattern, center bore, factory wheel sizes for each submodel and the aftermarket widths and offsets that bolt on to the Chrysler Pacifica built from 2017 to 2026 (L, LX, Touring, Touring Plus, Touring L, Touring L Plus, Select, Limited, Pinnacle, Hybrid).
Every 2017-2026 Chrysler Pacifica uses a 5X127 bolt pattern with a 71.5 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 71.5 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M12x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.
US-market submodels of the Chrysler Pacifica (RU) and the model years each was sold. All of them share the 5X127 bolt pattern.
| Submodel | Years | Factory wheel sizes |
|---|---|---|
| L | 2017-2020 | 17x7 +51 |
| LX | 2017-2020 | 17x7 +51 |
| Touring | 2017-2026 | 17x7 +51 |
| Touring Plus | 2017-2020 | 17x7 +51 |
| Touring L | 2017-2026 | 17x7 +51 |
| Touring L Plus | 2017-2020 | 17x7 +51 |
| Select | 2025-2026 | 17x7 +50 |
| Limited | 2017-2026 | 18x7.5 +51 |
| Pinnacle | 2021-2026 | 20x7.5 +50 20x7.5 +51 20x8 +45 20x8 +48 |
| Hybrid | 2017-2026 | See factory sizes below |
Wheel sizes Chrysler fitted to the 2017-2026 Chrysler Pacifica from the factory (all submodels; the table above lists them by submodel). Offsets are ET in millimeters.
| Factory size |
|---|
| 17x7 +50 |
| 18x7.5 +50 |
| 19x7.5 +51 |
| 20x7.5 +50 |
| 20x8 +45 |
| 20x8 +48 |
Widths and offsets with Verified Fitment on the 2017-2026 Chrysler Pacifica: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.
| Diameter | Width | Offset range |
|---|---|---|
| 17-21" | 7" | +15 to +57 |
| 17-21" | 7.5" | +21 to +51 |
| 17-21" | 8" | +28 to +44 |
| 17-21" | 8.5" | +34 to +38 |
| Diameter | Width | Offset range |
|---|---|---|
| 17-21" | 7" | +15 to +57 |
| 17-21" | 7.5" | +21 to +51 |
| 17-21" | 8" | +28 to +44 |
| 17-21" | 8.5" | +34 to +38 |
| Diameter | Width | Offset range |
|---|---|---|
| 18-21" | 7.5" | +21 to +51 |
| 18-21" | 8" | +28 to +44 |
| 18-21" | 8.5" | +34 to +38 |
| Diameter | Width | Offset range |
|---|---|---|
| 20-21" | 7.5" | +21 to +51 |
| 20-21" | 8" | +28 to +44 |
| 20-21" | 8.5" | +34 to +38 |
The 2017-2026 Chrysler Pacifica (RU) uses a 5X127 bolt pattern and a 71.5 mm center bore.
Factory sizes: 17x7 +50; 18x7.5 +50; 19x7.5 +51; 20x7.5 +50; 20x8 +45; 20x8 +48.
Its wheel fasteners use a M12x1.5 thread.
Bolt-on sizes run from 17" to 21" in diameter; see the size table for the offset range at each width.