Chrysler PT Cruiser (PT) 2001-2010 Wheel Fitment Guide

Bolt pattern, center bore, factory wheel sizes for each submodel and the aftermarket widths and offsets that bolt on to the Chrysler PT Cruiser built from 2001 to 2010 (Base, Classic, Touring, Limited, LX, GT, Dream Cruiser, Convertible).

Fitment specs

Bolt pattern5X100
Center bore57.1 mm
Lug threadM12x1.5
Model years2001-2010
GenerationPT

Every 2001-2010 Chrysler PT Cruiser uses a 5X100 bolt pattern with a 57.1 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 57.1 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M12x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.

Years & submodels

US-market submodels of the Chrysler PT Cruiser (PT) and the model years each was sold. All of them share the 5X100 bolt pattern.

SubmodelYearsFactory wheel sizes
Base2001-2010See factory sizes below
Classic2003-2006See factory sizes below
Touring2001-201015x6 +37
16x6 +40
Limited2001-200716x6 +40
LX2008-201015x6 +37
16x6 +40
GT2003-200717x6 +39
17x6.5 +45
17x7 +40
Dream Cruiser2001-2010See factory sizes below
Convertible2005-2008See factory sizes below

Factory wheel sizes

Wheel sizes Chrysler fitted to the 2001-2010 Chrysler PT Cruiser from the factory (all submodels; the table above lists them by submodel). Offsets are ET in millimeters.

Factory size
15x6 +37
16x6 +40
17x6 +39
17x6.5 +45
17x7 +40
17x7 +42
17x7.5 +40
18x7.5 +38
18x8 +38

Aftermarket sizes that bolt on

Widths and offsets with Verified Fitment on the 2001-2010 Chrysler PT Cruiser: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.

Base, Classic, Touring, LX, Dream Cruiser, Convertible

DiameterWidthOffset range
15-18"6"+10 to +47
15-18"6.5"+17 to +52
15-18"7"+23 to +45
15-18"7.5"+29 to +39

Wider still: 15x8.5 +21 to +32; 16x8.5 +21 to +32; 17x8.5 +21 to +32; 18x8.5 +21 to +32 fit with modifications (roll front and rear fender lips, front camber bolts for added negative camber, trim front fender liner if it rubs at full lock).

Limited

DiameterWidthOffset range
16-18"6"+10 to +50
16-18"6.5"+17 to +52
16-18"7"+23 to +45
16-18"7.5"+29 to +39

Wider still: 16x8.5 +21 to +32; 17x8.5 +21 to +32; 18x8.5 +21 to +32 fit with modifications (roll front and rear fender lips, front camber bolts for added negative camber, trim front fender liner if it rubs at full lock).

GT

DiameterWidthOffset range
17-18"6"+10 to +49
17-18"6.5"+17 to +52
17-18"7"+23 to +45
17-18"7.5"+29 to +39

Wider still: 17x8.5 +21 to +32; 18x8.5 +21 to +32 fit with modifications (roll front and rear fender lips, front camber bolts for added negative camber, trim front fender liner if it rubs at full lock).

FAQ

What is the bolt pattern of the 2001-2010 Chrysler PT Cruiser?

The 2001-2010 Chrysler PT Cruiser (PT) uses a 5X100 bolt pattern and a 57.1 mm center bore.

What size wheels came on the 2001-2010 Chrysler PT Cruiser from the factory?

Factory sizes: 15x6 +37; 16x6 +40; 17x6 +39; 17x6.5 +45; 17x7 +40; 17x7 +42; 17x7.5 +40; 18x7.5 +38; 18x8 +38.

What lug thread size does the 2001-2010 Chrysler PT Cruiser use?

Its wheel fasteners use a M12x1.5 thread.

What aftermarket wheel sizes fit the 2001-2010 Chrysler PT Cruiser without modifications?

Bolt-on sizes run from 15" to 18" in diameter; see the size table for the offset range at each width.