Bolt pattern, center bore, factory wheel sizes for each submodel and the aftermarket widths and offsets that bolt on to the Dodge Avenger built from 2008 to 2014 (SE, SXT, R/T).
Every 2008-2014 Dodge Avenger uses a 5X114.3 bolt pattern with a 67.1 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 67.1 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M12x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.
US-market submodels of the Dodge Avenger (JS) and the model years each was sold. All of them share the 5X114.3 bolt pattern.
| Submodel | Years | Factory wheel sizes |
|---|---|---|
| SE | 2008-2014 | 16x6.5 +40 17x7 +40 |
| SXT | 2008-2014 | 17x6.5 +40 17x7 +40 |
| R/T | 2008-2014 | 18x7 +40 |
Wheel sizes Dodge fitted to the 2008-2014 Dodge Avenger from the factory (all submodels; the table above lists them by submodel). Offsets are ET in millimeters.
| Factory size |
|---|
| 16x6.5 +40 |
| 16x7 +40 |
| 16x7.5 +43 |
| 17x6.5 +40 |
| 17x7 +40 |
| 17x7.5 +43 |
| 18x7 +40 |
| 18x7.5 +43 |
| 19x7.5 +43 |
| 19x8 +40 |
Widths and offsets with Verified Fitment on the 2008-2014 Dodge Avenger: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.
| Diameter | Width | Offset range |
|---|---|---|
| 16-20" | 6.5" | +15 to +50 |
| 16-20" | 7" | +21 to +52 |
| 16-20" | 7.5" | +28 to +46 |
| 16-20" | 8" | +34 to +39 |
| Diameter | Width | Offset range |
|---|---|---|
| 17-20" | 6.5" | +15 to +50 |
| 17-20" | 7" | +21 to +52 |
| 17-20" | 7.5" | +28 to +46 |
| 17-20" | 8" | +34 to +39 |
| Diameter | Width | Offset range |
|---|---|---|
| 18-20" | 7" | +21 to +50 |
| 18-20" | 7.5" | +28 to +46 |
| 18-20" | 8" | +34 to +39 |
In-stock PG WHEELS sets in sizes with Verified Fitment for the 2008-2014 Dodge Avenger. Each card shows only the sizes that fit; prices are for a set of 4 with free shipping in the lower 48.







Modifications Required (roll front and rear fender lips, front camber bolts for -1° or more, hub-centric rings for aftermarket wheels)







Modifications Required (roll front and rear fender lips, front camber bolts for -1° or more, hub-centric rings for aftermarket wheels)






Modifications Required (roll front and rear fender lips, front camber bolts for -1° or more, hub-centric rings for aftermarket wheels)
The 2008-2014 Dodge Avenger (JS) uses a 5X114.3 bolt pattern and a 67.1 mm center bore.
Factory sizes: 16x6.5 +40; 16x7 +40; 16x7.5 +43; 17x6.5 +40; 17x7 +40; 17x7.5 +43; 18x7 +40; 18x7.5 +43; 19x7.5 +43; 19x8 +40.
Its wheel fasteners use a M12x1.5 thread.
Bolt-on sizes run from 16" to 20" in diameter; see the size table for the offset range at each width.