Dodge Dakota (ND) 2005-2010 Wheel Fitment Guide

Bolt pattern, center bore, factory wheel sizes for each submodel and the aftermarket widths and offsets that bolt on to the Dodge Dakota built from 2005 to 2010 (Laramie, SLT, ST, Big Horn, Lone Star, SXT, TRX4).

Fitment specs

Bolt pattern5X139.7
Center bore77.8 mm
Lug thread9/16"-18UNF
Model years2005-2010
GenerationND

Every 2005-2010 Dodge Dakota uses a 5X139.7 bolt pattern with a 77.8 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 77.8 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is 9/16"-18UNF. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.

Years & submodels

US-market submodels of the Dodge Dakota (ND) and the model years each was sold. All of them share the 5X139.7 bolt pattern.

SubmodelYearsFactory wheel sizes
Laramie2005-201018x8 +20
18x8 +25.4
SLT2005-2008See factory sizes below
ST2005-201016x7 +25.4
16x8 +25.4
Big Horn2009-201016x7 +25.4
16x8 +25.4
Lone Star2009-201016x7 +25.4
16x8 +25.4
SXT2009-201018x8 +20
18x8 +25.4
TRX42009-201016x7 +25.4
16x8 +25.4

Factory wheel sizes

Wheel sizes Dodge fitted to the 2005-2010 Dodge Dakota from the factory (all submodels; the table above lists them by submodel). Offsets are ET in millimeters.

Factory size
16x7 +25.4
16x8 +25.4
17x8 +25
18x8 +20
18x8 +25.4
19x8.5 +21
20x9 +19

Aftermarket sizes that bolt on

Widths and offsets with Verified Fitment on the 2005-2010 Dodge Dakota: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.

Laramie, SXT

DiameterWidthOffset range
18-19"8"+8 to +30
18-19"8.5"+15 to +24

Wider still: 18x9.5 +7 to +18; 19x9.5 +7 to +18 fit with modifications (2 in front leveling kit for 33 in tires, trim front bumper valance and inner fender liners, hub-centric rings for aftermarket wheels).

SLT, ST, Big Horn, Lone Star, TRX4

DiameterWidthOffset range
16-19"7"-4 to +35
16-19"7.5"+2 to +37
16-19"8"+8 to +31
16-19"8.5"+15 to +24

Wider still: 16x9.5 +7 to +18; 17x9.5 +7 to +18; 18x9.5 +7 to +18; 19x9.5 +7 to +18 fit with modifications (2 in front leveling kit for 33 in tires, trim front bumper valance and inner fender liners, hub-centric rings for aftermarket wheels).

FAQ

What is the bolt pattern of the 2005-2010 Dodge Dakota?

The 2005-2010 Dodge Dakota (ND) uses a 5X139.7 bolt pattern and a 77.8 mm center bore.

What size wheels came on the 2005-2010 Dodge Dakota from the factory?

Factory sizes: 16x7 +25.4; 16x8 +25.4; 17x8 +25; 18x8 +20; 18x8 +25.4; 19x8.5 +21; 20x9 +19.

What lug thread size does the 2005-2010 Dodge Dakota use?

Its wheel fasteners use a 9/16"-18UNF thread.

What aftermarket wheel sizes fit the 2005-2010 Dodge Dakota without modifications?

Bolt-on sizes run from 16" to 19" in diameter; see the size table for the offset range at each width.