Dodge Durango (WD) 2011-2026 Wheel Fitment Guide

Bolt pattern, center bore, factory wheel sizes for each submodel and the aftermarket widths and offsets that bolt on to the Dodge Durango built from 2011 to 2026 (Express, SXT, Crew, Heat, Limited, GT, Citadel, R/T, SRT 392, SRT Hellcat).

Fitment specs

Bolt pattern5X127
Center bore71.5 mm
Lug threadM14x1.5
Model years2011-2026
GenerationWD

Every 2011-2026 Dodge Durango uses a 5X127 bolt pattern with a 71.5 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 71.5 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M14x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.

Years & submodels

US-market submodels of the Dodge Durango (WD) and the model years each was sold. All of them share the 5X127 bolt pattern.

SubmodelYearsFactory wheel sizes
Express2011-201218x8 +56.4
SXT2011-202418x8 +56
18x8 +56.4
Crew2011-201318x8 +56.4
Heat2011-201320x8 +56.4
Limited2014-201618x8 +56.4
GT2016-202618x8 +56
18x8 +56.4
20x8 +56
20x8 +56.4
Citadel2011-202320x8 +56
20x8 +56.4
R/T2011-202620x8 +56
20x8 +56.4
SRT 3922018-202620x8 +56
20x8 +56.4
20x8.5 +55
SRT Hellcat2021-202620x8 +56
20x8 +56.4
20x8.5 +55

Factory wheel sizes

Wheel sizes Dodge fitted to the 2011-2026 Dodge Durango from the factory (all submodels; the table above lists them by submodel). Offsets are ET in millimeters.

Factory size
18x8 +56
19x8 +56
20x8 +56
20x8.5 +55
21x8.5 +55
22x9 +50

Aftermarket sizes that bolt on

Widths and offsets with Verified Fitment on the 2011-2026 Dodge Durango: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.

Express, Crew, Limited

DiameterWidthOffset range
18-24"8"+39 to +62
18-24"8.5"+46 to +56

Wider still: 18x9.5 +38 to +49; 19x9.5 +38 to +49; 20x9.5 +38 to +49; 21x9.5 +38 to +49; 22x9.5 +38 to +49; 23x9.5 +38 to +49… fit with modifications (roll fender lips / trim plastic fender liners, 1-2 in leveling or lift kit for larger tires, hub-centric rings for aftermarket wheels).

SXT, GT

DiameterWidthOffset range
18-24"8"+39 to +62
18-24"8.5"+46 to +56

Wider still: 18x9.5 +38 to +49; 19x9.5 +38 to +49; 20x9.5 +38 to +49; 21x9.5 +38 to +49; 22x9.5 +38 to +49; 23x9.5 +38 to +49… fit with modifications (roll fender lips / trim plastic fender liners, 1-2 in leveling or lift kit for larger tires, hub-centric rings for aftermarket wheels).

Heat

DiameterWidthOffset range
20-24"8"+39 to +62
20-24"8.5"+46 to +56

Wider still: 20x9.5 +38 to +49; 21x9.5 +38 to +49; 22x9.5 +38 to +49; 23x9.5 +38 to +49; 24x9.5 +38 to +49 fit with modifications (roll fender lips / trim plastic fender liners, 1-2 in leveling or lift kit for larger tires, hub-centric rings for aftermarket wheels).

Citadel, R/T, SRT 392, SRT Hellcat

DiameterWidthOffset range
20-24"8"+39 to +62
20-24"8.5"+46 to +56

Wider still: 20x9.5 +38 to +49; 21x9.5 +38 to +49; 22x9.5 +38 to +49; 23x9.5 +38 to +49; 24x9.5 +38 to +49 fit with modifications (roll fender lips / trim plastic fender liners, 1-2 in leveling or lift kit for larger tires, hub-centric rings for aftermarket wheels).

FAQ

What is the bolt pattern of the 2011-2026 Dodge Durango?

The 2011-2026 Dodge Durango (WD) uses a 5X127 bolt pattern and a 71.5 mm center bore.

What size wheels came on the 2011-2026 Dodge Durango from the factory?

Factory sizes: 18x8 +56; 19x8 +56; 20x8 +56; 20x8.5 +55; 21x8.5 +55; 22x9 +50.

What lug thread size does the 2011-2026 Dodge Durango use?

Its wheel fasteners use a M14x1.5 thread.

What aftermarket wheel sizes fit the 2011-2026 Dodge Durango without modifications?

Bolt-on sizes run from 18" to 24" in diameter; see the size table for the offset range at each width.