Dodge Hornet 1st Gen 2023-2025 Wheel Fitment Guide

Bolt pattern, center bore, factory wheel sizes for each submodel and the aftermarket widths and offsets that bolt on to the Dodge Hornet built from 2023 to 2025 (GT, GT Plus, R/T, R/T Plus).

Fitment specs

Bolt pattern5X110
Center bore65.1 mm
Lug threadM12x1.25
Model years2023-2025
Generation1st Gen

Every 2023-2025 Dodge Hornet uses a 5X110 bolt pattern with a 65.1 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 65.1 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M12x1.25. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.

Years & submodels

US-market submodels of the Dodge Hornet (1st Gen) and the model years each was sold. All of them share the 5X110 bolt pattern.

SubmodelYearsFactory wheel sizes
GT2023-202517x7 +37
GT Plus2023-202517x7 +37
R/T2023-202518x7.5 +37
R/T Plus2024-202518x7.5 +37

Factory wheel sizes

Wheel sizes Dodge fitted to the 2023-2025 Dodge Hornet from the factory (all submodels; the table above lists them by submodel). Offsets are ET in millimeters.

Factory size
17x7 +37
18x7.5 +37
19x8 +37
20x8 +37

Aftermarket sizes that bolt on

Widths and offsets with Verified Fitment on the 2023-2025 Dodge Hornet: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.

GT, GT Plus

DiameterWidthOffset range
17-20"7"+13 to +47
17-20"7.5"+20 to +42
17-20"8"+26 to +36

Wider still: 17x9 +18 to +29; 18x9 +18 to +29; 19x9 +18 to +29; 20x9 +18 to +29 fit with modifications (roll fender lips / trim plastic fender liners, 1-2 in leveling or lift kit for larger tires, hub-centric rings for aftermarket wheels).

R/T, R/T Plus

DiameterWidthOffset range
18-20"7.5"+20 to +42
18-20"8"+26 to +36

Wider still: 18x9 +18 to +29; 19x9 +18 to +29; 20x9 +18 to +29 fit with modifications (roll fender lips / trim plastic fender liners, 1-2 in leveling or lift kit for larger tires, hub-centric rings for aftermarket wheels).

FAQ

What is the bolt pattern of the 2023-2025 Dodge Hornet?

The 2023-2025 Dodge Hornet (1st Gen) uses a 5X110 bolt pattern and a 65.1 mm center bore.

What size wheels came on the 2023-2025 Dodge Hornet from the factory?

Factory sizes: 17x7 +37; 18x7.5 +37; 19x8 +37; 20x8 +37.

What lug thread size does the 2023-2025 Dodge Hornet use?

Its wheel fasteners use a M12x1.25 thread.

What aftermarket wheel sizes fit the 2023-2025 Dodge Hornet without modifications?

Bolt-on sizes run from 17" to 20" in diameter; see the size table for the offset range at each width.