Dodge Journey (JC) 2009-2020 Wheel Fitment Guide

Bolt pattern, center bore, factory wheel sizes for each submodel and the aftermarket widths and offsets that bolt on to the Dodge Journey built from 2009 to 2020 (SE, SXT, R/T, Crew, Lux, GT, Crossroad).

Fitment specs

Bolt pattern5X127
Center bore71.5 mm
Lug threadM12x1.5
Model years2009-2020
GenerationJC

Every 2009-2020 Dodge Journey uses a 5X127 bolt pattern with a 71.5 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 71.5 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M12x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.

Years & submodels

US-market submodels of the Dodge Journey (JC) and the model years each was sold. All of them share the 5X127 bolt pattern.

SubmodelYearsFactory wheel sizes
SE2009-202016x6.5 +44
17x6.5 +44
SXT2009-202017x6.5 +44
R/T2009-2010See factory sizes below
Crew2011-201819x7 +40
Lux2011-201219x7 +40
GT2017-202019x7 +40
Crossroad2018-202019x7 +40

Factory wheel sizes

Wheel sizes Dodge fitted to the 2009-2020 Dodge Journey from the factory (all submodels; the table above lists them by submodel). Offsets are ET in millimeters.

Factory size
16x6.5 +44
17x6.5 +44
18x6.5 +44
18x7 +40
18x7 +42
19x7 +40
19x7.5 +38
19x7.5 +40
20x8 +35
20x8 +38

Aftermarket sizes that bolt on

Widths and offsets with Verified Fitment on the 2009-2020 Dodge Journey: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.

SE

DiameterWidthOffset range
16-22"6.5"+27 to +49
16-22"7"+33 to +43

Wider still: 16x8 +25 to +36; 17x8 +25 to +36; 18x8 +25 to +36; 19x8 +25 to +36; 20x8 +25 to +36; 21x8 +25 to +36… fit with modifications (roll fender lips / trim plastic fender liners, 1-2 in leveling or lift kit for larger tires, hub-centric rings for aftermarket wheels).

SXT

DiameterWidthOffset range
17-22"6.5"+27 to +49
17-22"7"+33 to +43

Wider still: 17x8 +25 to +36; 18x8 +25 to +36; 19x8 +25 to +36; 20x8 +25 to +36; 21x8 +25 to +36; 22x8 +25 to +36 fit with modifications (roll fender lips / trim plastic fender liners, 1-2 in leveling or lift kit for larger tires, hub-centric rings for aftermarket wheels).

R/T

DiameterWidthOffset range
16-22"6.5"+27 to +49
16-22"7"+33 to +43

Wider still: 16x8 +25 to +36; 17x8 +25 to +36; 18x8 +25 to +36; 19x8 +25 to +36; 20x8 +25 to +36; 21x8 +25 to +36… fit with modifications (roll fender lips / trim plastic fender liners, 1-2 in leveling or lift kit for larger tires, hub-centric rings for aftermarket wheels).

Crew, Lux, GT, Crossroad

DiameterWidthOffset range
19-22"7"+33 to +43

Wider still: 19x8 +25 to +36; 20x8 +25 to +36; 21x8 +25 to +36; 22x8 +25 to +36 fit with modifications (roll fender lips / trim plastic fender liners, 1-2 in leveling or lift kit for larger tires, hub-centric rings for aftermarket wheels).

FAQ

What is the bolt pattern of the 2009-2020 Dodge Journey?

The 2009-2020 Dodge Journey (JC) uses a 5X127 bolt pattern and a 71.5 mm center bore.

What size wheels came on the 2009-2020 Dodge Journey from the factory?

Factory sizes: 16x6.5 +44; 17x6.5 +44; 18x6.5 +44; 18x7 +40; 18x7 +42; 19x7 +40; 19x7.5 +38; 19x7.5 +40; 20x8 +35; 20x8 +38.

What lug thread size does the 2009-2020 Dodge Journey use?

Its wheel fasteners use a M12x1.5 thread.

What aftermarket wheel sizes fit the 2009-2020 Dodge Journey without modifications?

Bolt-on sizes run from 16" to 22" in diameter; see the size table for the offset range at each width.