Bolt pattern, center bore, factory wheel sizes for each submodel and the aftermarket widths and offsets that bolt on to the Dodge Magnum built from 2005 to 2008 (SE, SXT, R/T, SRT8).
Every 2005-2008 Dodge Magnum uses a 5X115 bolt pattern with a 71.5 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 71.5 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M14x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.
US-market submodels of the Dodge Magnum (LX) and the model years each was sold. All of them share the 5X115 bolt pattern.
| Submodel | Years | Factory wheel sizes |
|---|---|---|
| SE | 2005-2008 | 17x7 +22 |
| SXT | 2005-2008 | See factory sizes below |
| R/T | 2005-2008 | See factory sizes below |
| SRT8 | 2006-2008 | 20x9 +20 |
Wheel sizes Dodge fitted to the 2005-2008 Dodge Magnum from the factory (all submodels; the table above lists them by submodel). Offsets are ET in millimeters.
| Factory size |
|---|
| 17x7 +22 |
| 17x7.5 +24 |
| 18x7.5 +24 |
| 18x8 +24 |
| 19x7.5 +24 |
| 19x8.5 +25 |
| 20x9 +20 |
Widths and offsets with Verified Fitment on the 2005-2008 Dodge Magnum: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.
| Diameter | Width | Front offset | Rear offset |
|---|---|---|---|
| 17-21" | 7" | +0 to +32 | -14 to +32 |
| 17-21" | 7.5" | +6 to +36 | -8 to +36 |
| 17-21" | 8" | +13 to +29 | -1 to +30 |
| 17-21" | 8.5" | +19 to +23 | +5 to +23 |
| 17-21" | 9" | — | +11 to +17 |
| Diameter | Width | Front offset | Rear offset |
|---|---|---|---|
| 20-21" | 9" | +20 | +11 to +20 |
The 2005-2008 Dodge Magnum (LX) uses a 5X115 bolt pattern and a 71.5 mm center bore.
Factory sizes: 17x7 +22; 17x7.5 +24; 18x7.5 +24; 18x8 +24; 19x7.5 +24; 19x8.5 +25; 20x9 +20.
Its wheel fasteners use a M14x1.5 thread.
Bolt-on sizes run from 17" to 21" in diameter; see the size table for the offset range at each width.