Bolt pattern, center bore, factory wheel sizes and the aftermarket widths and offsets that bolt on to the Dodge Monaco built from 1990 to 1992 (LE, ES).
Every 1990-1992 Dodge Monaco uses a 5X108 bolt pattern with a 71.6 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 71.6 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M12x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.
US-market submodels of the Dodge Monaco (B-body) and the model years each was sold. All of them share the 5X108 bolt pattern.
| Submodel | Years |
|---|---|
| LE | 1990-1992 |
| ES | 1990-1992 |
Wheel sizes Dodge fitted to the 1990-1992 Dodge Monaco from the factory. Offsets are ET in millimeters.
| Factory size |
|---|
| 14x6 +35 |
| 15x6 +35 |
| 16x6.5 +38 |
Widths and offsets with Verified Fitment on the 1990-1992 Dodge Monaco: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.
| Diameter | Width | Offset range |
|---|---|---|
| 14-17" | 6" | +18 to +41 |
| 14-17" | 6.5" | +24 to +34 |
Wider still: 14x7.5 +16 to +27; 15x7.5 +16 to +27; 16x7.5 +16 to +27; 17x7.5 +16 to +27 fit with modifications (roll front and rear fender lips, front camber bolts for -1° or more, hub-centric rings for aftermarket wheels).
The 1990-1992 Dodge Monaco (B-body) uses a 5X108 bolt pattern and a 71.6 mm center bore.
Factory sizes: 14x6 +35; 15x6 +35; 16x6.5 +38.
Its wheel fasteners use a M12x1.5 thread.
Bolt-on sizes run from 14" to 17" in diameter; see the size table for the offset range at each width.