Bolt pattern, center bore, factory wheel sizes for each submodel and the aftermarket widths and offsets that bolt on to the Dodge Neon built from 1995 to 1999 (Base, Highline, Sport, ACR, R/T).
Every 1995-1999 Dodge Neon uses a 5X100 bolt pattern with a 57.1 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 57.1 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M12x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.
US-market submodels of the Dodge Neon (1st Gen) and the model years each was sold. All of them share the 5X100 bolt pattern.
| Submodel | Years | Factory wheel sizes |
|---|---|---|
| Base | 1995-1999 | See factory sizes below |
| Highline | 1995-1999 | 14x5.5 +40 14x6 +40 |
| Sport | 1995-1999 | 14x5.5 +40 14x6 +40 |
| ACR | 1995-1999 | 15x6 +40 |
| R/T | 1998-1999 | 14x5.5 +40 14x6 +40 16x6 +40 |
Wheel sizes Dodge fitted to the 1995-1999 Dodge Neon from the factory (all submodels; the table above lists them by submodel). Offsets are ET in millimeters.
| Factory size |
|---|
| 14x5.5 +40 |
| 14x6 +40 |
| 15x6 +40 |
| 16x6 +40 |
Widths and offsets with Verified Fitment on the 1995-1999 Dodge Neon: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.
| Diameter | Width | Offset range |
|---|---|---|
| 14-17" | 5.5" | +23 to +45 |
| 14-17" | 6" | +29 to +39 |
Wider still: 14x7 +21 to +32; 15x7 +21 to +32; 16x7 +21 to +32; 17x7 +21 to +32 fit with modifications (roll front and rear fender lips, front camber bolts for -1° or more, hub-centric rings for aftermarket wheels).
| Diameter | Width | Offset range |
|---|---|---|
| 14-17" | 5.5" | +23 to +45 |
| 14-17" | 6" | +29 to +39 |
Wider still: 14x7 +21 to +32; 15x7 +21 to +32; 16x7 +21 to +32; 17x7 +21 to +32 fit with modifications (roll front and rear fender lips, front camber bolts for -1° or more, hub-centric rings for aftermarket wheels).
| Diameter | Width | Offset range |
|---|---|---|
| 15-17" | 6" | +29 to +40 |
Wider still: 15x7 +21 to +32; 16x7 +21 to +32; 17x7 +21 to +32 fit with modifications (roll front and rear fender lips, front camber bolts for -1° or more, hub-centric rings for aftermarket wheels).
The 1995-1999 Dodge Neon (1st Gen) uses a 5X100 bolt pattern and a 57.1 mm center bore.
Factory sizes: 14x5.5 +40; 14x6 +40; 15x6 +40; 16x6 +40.
Its wheel fasteners use a M12x1.5 thread.
Bolt-on sizes run from 14" to 17" in diameter; see the size table for the offset range at each width.