Bolt pattern, center bore, factory wheel sizes and the aftermarket widths and offsets that bolt on to the Dodge Ram SRT-10 built from 2004 to 2006 (Regular Cab, Quad Cab).
Every 2004-2006 Dodge Ram SRT-10 uses a 5X139.7 bolt pattern with a 77.8 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 77.8 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is 9/16"-18UNF. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.
US-market submodels of the Dodge Ram SRT-10 (DR) and the model years each was sold. All of them share the 5X139.7 bolt pattern.
| Submodel | Years |
|---|---|
| Regular Cab | 2004-2006 |
| Quad Cab | 2005-2006 |
Wheel sizes Dodge fitted to the 2004-2006 Dodge Ram SRT-10 from the factory. Offsets are ET in millimeters.
| Factory size |
|---|
| 20x9 +25.4 |
| 21x9 +25 |
| 22x10 +25.4 |
Widths and offsets with Verified Fitment on the 2004-2006 Dodge Ram SRT-10: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.
| Diameter | Width | Offset range |
|---|---|---|
| 20-24" | 9" | +8 to +31 |
| 20-24" | 9.5" | +15 to +24 |
Wider still: 20x10.5 +7 to +18; 21x10.5 +7 to +18; 22x10.5 +7 to +18; 23x10.5 +7 to +18; 24x10.5 +7 to +18 fit with modifications (2 in front leveling kit for 33 in tires, trim front bumper valance and inner fender liners, hub-centric rings for aftermarket wheels).
The 2004-2006 Dodge Ram SRT-10 (DR) uses a 5X139.7 bolt pattern and a 77.8 mm center bore.
Factory sizes: 20x9 +25.4; 21x9 +25; 22x10 +25.4.
Its wheel fasteners use a 9/16"-18UNF thread.
Bolt-on sizes run from 20" to 24" in diameter; see the size table for the offset range at each width.