Bolt pattern, center bore, factory wheel sizes and the aftermarket widths and offsets that bolt on to the Dodge Ram Van 2500/3500 built from 1994 to 2003 (B250, B250 Maxi, B350, B350 Maxi, B2500, B2500 Maxi, B3500, B3500 Maxi).
Every 1994-2003 Dodge Ram Van 2500/3500 uses a 8X165.1 bolt pattern with a 121.3 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 121.3 mm inner diameter so the wheel centers on the hub instead of the lugs. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.
US-market submodels of the Dodge Ram Van 2500/3500 (AB) and the model years each was sold. All of them share the 8X165.1 bolt pattern.
| Submodel | Years |
|---|---|
| B250 | 1994 |
| B250 Maxi | 1994 |
| B350 | 1994 |
| B350 Maxi | 1994 |
| B2500 | 1995-2003 |
| B2500 Maxi | 1995-2003 |
| B3500 | 1995-2003 |
| B3500 Maxi | 1995-2003 |
Wheel sizes Dodge fitted to the 1994-2003 Dodge Ram Van 2500/3500 from the factory. Offsets are ET in millimeters.
| Factory size |
|---|
| 16x6.5 +19 |
| 16x7 +12 |
Widths and offsets with Verified Fitment on the 1994-2003 Dodge Ram Van 2500/3500: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.
| Diameter | Width | Offset range |
|---|---|---|
| 16-18" | 6.5" | +2 to +24 |
| 16-18" | 7" | +8 to +18 |
Wider still: 16x8 +0 to +11; 17x8 +0 to +11; 18x8 +0 to +11 fit with modifications (roll fender lips, front camber bolts, hub-centric rings for aftermarket wheels).
The 1994-2003 Dodge Ram Van 2500/3500 (AB) uses a 8X165.1 bolt pattern and a 121.3 mm center bore.
Factory sizes: 16x6.5 +19; 16x7 +12.
Bolt-on sizes run from 16" to 18" in diameter; see the size table for the offset range at each width.