Bolt pattern, center bore, factory wheel sizes and the aftermarket widths and offsets that bolt on to the Dodge Ram Van B150/B250 built from 1981 to 1993 (B150, B250, B250 Maxi).
Every 1981-1993 Dodge Ram Van B150/B250 uses a 5X139.7 bolt pattern with a 77.8 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 77.8 mm inner diameter so the wheel centers on the hub instead of the lugs. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.
US-market submodels of the Dodge Ram Van B150/B250 (2nd Gen) and the model years each was sold. All of them share the 5X139.7 bolt pattern.
| Submodel | Years |
|---|---|
| B150 | 1981-1993 |
| B250 | 1981-1993 |
| B250 Maxi | 1981-1993 |
Wheel sizes Dodge fitted to the 1981-1993 Dodge Ram Van B150/B250 from the factory. Offsets are ET in millimeters.
| Factory size |
|---|
| 15x6.5 +32 |
Widths and offsets with Verified Fitment on the 1981-1993 Dodge Ram Van B150/B250: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.
| Diameter | Width | Offset range |
|---|---|---|
| 15-17" | 6.5" | +15 to +37 |
| 15-17" | 7" | +21 to +31 |
Wider still: 15x8 +13 to +24; 16x8 +13 to +24; 17x8 +13 to +24 fit with modifications (roll fender lips, front camber bolts, hub-centric rings for aftermarket wheels).
The 1981-1993 Dodge Ram Van B150/B250 (2nd Gen) uses a 5X139.7 bolt pattern and a 77.8 mm center bore.
Factory sizes: 15x6.5 +32.
Bolt-on sizes run from 15" to 17" in diameter; see the size table for the offset range at each width.