Bolt pattern, center bore, factory wheel sizes for each submodel and the aftermarket widths and offsets that bolt on to the Dodge Stealth built from 1991 to 1996 (Base, ES, R/T, R/T Turbo).
Every 1991-1996 Dodge Stealth uses a 5X114.3 bolt pattern with a 67.1 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 67.1 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M12x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.
US-market submodels of the Dodge Stealth (Z15A/Z16A) and the model years each was sold. All of them share the 5X114.3 bolt pattern.
| Submodel | Years | Factory wheel sizes |
|---|---|---|
| Base | 1991-1996 | See factory sizes below |
| ES | 1991-1994 | 15x6.5 +37 16x7 +40 |
| R/T | 1991-1996 | 16x7 +40 |
| R/T Turbo | 1991-1996 | 17x7.5 +45 |
Wheel sizes Dodge fitted to the 1991-1996 Dodge Stealth from the factory (all submodels; the table above lists them by submodel). Offsets are ET in millimeters.
| Factory size |
|---|
| 15x6.5 +37 |
| 16x7 +40 |
| 17x7.5 +45 |
| 18x8 +40 |
Widths and offsets with Verified Fitment on the 1991-1996 Dodge Stealth: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.
| Diameter | Width | Offset range |
|---|---|---|
| 15-17" | 6.5" | +17 to +47 |
| 15-17" | 7" | +23 to +45 |
| 15-17" | 7.5" | +29 to +39 |
Wider still: 15x8.5 +21 to +32; 16x8.5 +21 to +32; 17x8.5 +21 to +32 fit with modifications (roll front and rear fender lips, front camber bolts for -1° or more, hub-centric rings for aftermarket wheels).
| Diameter | Width | Offset range |
|---|---|---|
| 16-17" | 7" | +23 to +45 |
| 16-17" | 7.5" | +29 to +39 |
Wider still: 16x8.5 +21 to +32; 17x8.5 +21 to +32 fit with modifications (roll front and rear fender lips, front camber bolts for -1° or more, hub-centric rings for aftermarket wheels).
| Diameter | Width | Offset range |
|---|---|---|
| 17" | 7.5" | +29 to +45 |
| 17" | 8" | +36 to +38 |
Wider still: 17x8.5 +21 to +32 fit with modifications (roll front and rear fender lips, front camber bolts for -1° or more, hub-centric rings for aftermarket wheels).
In-stock PG WHEELS sets in sizes with Verified Fitment for the 1991-1996 Dodge Stealth. Each card shows only the sizes that fit; prices are for a set of 4 with free shipping in the lower 48.
The 1991-1996 Dodge Stealth (Z15A/Z16A) uses a 5X114.3 bolt pattern and a 67.1 mm center bore.
Factory sizes: 15x6.5 +37; 16x7 +40; 17x7.5 +45; 18x8 +40.
Its wheel fasteners use a M12x1.5 thread.
Bolt-on sizes run from 15" to 17" in diameter; see the size table for the offset range at each width.