Dodge Stratus (JA) 1995-2000 Wheel Fitment Guide

Bolt pattern, center bore, factory wheel sizes for each submodel and the aftermarket widths and offsets that bolt on to the Dodge Stratus built from 1995 to 2000 (Base, ES).

Fitment specs

Bolt pattern5X100
Center bore57.1 mm
Lug threadM12x1.5
Model years1995-2000
GenerationJA

Every 1995-2000 Dodge Stratus uses a 5X100 bolt pattern with a 57.1 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 57.1 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M12x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.

Years & submodels

US-market submodels of the Dodge Stratus (JA) and the model years each was sold. All of them share the 5X100 bolt pattern.

SubmodelYearsFactory wheel sizes
Base1995-2000See factory sizes below
ES1995-200015x6 +42

Factory wheel sizes

Wheel sizes Dodge fitted to the 1995-2000 Dodge Stratus from the factory (all submodels; the table above lists them by submodel). Offsets are ET in millimeters.

Factory size
14x6 +37
14x6 +40
15x6 +40
15x6.5 +40
15x7 +38
16x6 +40
16x6.5 +40
16x7 +38
17x6.5 +40
17x7.5 +35
18x7 +38
18x8 +33

Aftermarket sizes that bolt on

Widths and offsets with Verified Fitment on the 1995-2000 Dodge Stratus: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.

Base

DiameterWidthOffset range
14-19"6"+20 to +43
14-19"6.5"+26 to +36

Wider still: 14x7.5 +18 to +29; 15x7.5 +18 to +29; 16x7.5 +18 to +29; 17x7.5 +18 to +29; 18x7.5 +18 to +29; 19x7.5 +18 to +29 fit with modifications (roll front and rear fender lips, front camber bolts for -1° or more, hub-centric rings for aftermarket wheels).

ES

DiameterWidthOffset range
15-19"6"+20 to +43
15-19"6.5"+26 to +36

Wider still: 15x7.5 +18 to +29; 16x7.5 +18 to +29; 17x7.5 +18 to +29; 18x7.5 +18 to +29; 19x7.5 +18 to +29 fit with modifications (roll front and rear fender lips, front camber bolts for -1° or more, hub-centric rings for aftermarket wheels).

FAQ

What is the bolt pattern of the 1995-2000 Dodge Stratus?

The 1995-2000 Dodge Stratus (JA) uses a 5X100 bolt pattern and a 57.1 mm center bore.

What size wheels came on the 1995-2000 Dodge Stratus from the factory?

Factory sizes: 14x6 +37; 14x6 +40; 15x6 +40; 15x6.5 +40; 15x7 +38; 16x6 +40; 16x6.5 +40; 16x7 +38; 17x6.5 +40; 17x7.5 +35; 18x7 +38; 18x8 +33.

What lug thread size does the 1995-2000 Dodge Stratus use?

Its wheel fasteners use a M12x1.5 thread.

What aftermarket wheel sizes fit the 1995-2000 Dodge Stratus without modifications?

Bolt-on sizes run from 14" to 19" in diameter; see the size table for the offset range at each width.