Bolt pattern, center bore, factory wheel sizes and the aftermarket widths and offsets that bolt on to the Dodge Stratus Coupe built from 2001 to 2005 (ES Sedan, R/T Coupe, SE Coupe, SE Sedan, R/T Sedan, SXT Coupe, SXT Sedan).
Every 2001-2005 Dodge Stratus Coupe uses a 5X114.3 bolt pattern with a 67.1 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 67.1 mm inner diameter so the wheel centers on the hub instead of the lugs. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.
US-market submodels of the Dodge Stratus Coupe (ST-22) and the model years each was sold. All of them share the 5X114.3 bolt pattern.
| Submodel | Years |
|---|---|
| ES Sedan | 2001-2004 |
| R/T Coupe | 2001-2005 |
| SE Coupe | 2001-2003 |
| SE Sedan | 2001-2004 |
| R/T Sedan | 2002-2005 |
| SXT Coupe | 2003-2005 |
| SXT Sedan | 2003-2005 |
Wheel sizes Dodge fitted to the 2001-2005 Dodge Stratus Coupe from the factory. Offsets are ET in millimeters.
| Factory size |
|---|
| 16x6 +46 |
| 17x6.5 +45 |
| 17x7 +45 |
| 17x7.5 +45 |
| 18x7.5 +42 |
| 18x7.5 +45 |
| 18x8 +40 |
Widths and offsets with Verified Fitment on the 2001-2005 Dodge Stratus Coupe: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.
| Diameter | Width | Offset range |
|---|---|---|
| 16-19" | 6" | +29 to +51 |
| 16-19" | 6.5" | +35 to +45 |
Wider still: 16x7.5 +27 to +38; 17x7.5 +27 to +38; 18x7.5 +27 to +38; 19x7.5 +27 to +38 fit with modifications (roll front and rear fender lips, front camber bolts for -1° or more, hub-centric rings for aftermarket wheels).
In-stock PG WHEELS sets in sizes with Verified Fitment for the 2001-2005 Dodge Stratus Coupe. Each card shows only the sizes that fit; prices are for a set of 4 with free shipping in the lower 48.
Modifications Required (roll front and rear fender lips, front camber bolts for -1° or more, hub-centric rings for aftermarket wheels)
The 2001-2005 Dodge Stratus Coupe (ST-22) uses a 5X114.3 bolt pattern and a 67.1 mm center bore.
Factory sizes: 16x6 +46; 17x6.5 +45; 17x7 +45; 17x7.5 +45; 18x7.5 +42; 18x7.5 +45; 18x8 +40.
Bolt-on sizes run from 16" to 19" in diameter; see the size table for the offset range at each width.