Ford Aerostar 1st Gen 1986-1997 Wheel Fitment Guide

Bolt pattern, center bore, factory wheel sizes and the aftermarket widths and offsets that bolt on to the Ford Aerostar built from 1986 to 1997 (Base, XL, XLT, Eddie Bauer).

Fitment specs

Bolt pattern5X114.3
Center bore70.6 mm
Lug thread1/2"-20UNF
Model years1986-1997
Generation1st Gen

Every 1986-1997 Ford Aerostar uses a 5X114.3 bolt pattern with a 70.6 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 70.6 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is 1/2"-20UNF. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.

Years & submodels

US-market submodels of the Ford Aerostar (1st Gen) and the model years each was sold. All of them share the 5X114.3 bolt pattern.

SubmodelYears
Base1986-1997
XL1986-1997
XLT1986-1997
Eddie Bauer1986-1997

Factory wheel sizes

Wheel sizes Ford fitted to the 1986-1997 Ford Aerostar from the factory. Offsets are ET in millimeters.

Factory size
14x5.5 +20
14x6 +10
15x7 +12
16x6 +20

Aftermarket sizes that bolt on

Widths and offsets with Verified Fitment on the 1986-1997 Ford Aerostar: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.

DiameterWidthOffset range
14-16"6"-7 to +15
14-16"6.5"-1 to +9

Wider still: 14x7.5 -9 to +2; 15x7.5 -9 to +2; 16x7.5 -9 to +2 fit with modifications (hub-centric rings for aftermarket bores, roll fender lips, check caliper and suspension clearance on wider wheels).

FAQ

What is the bolt pattern of the 1986-1997 Ford Aerostar?

The 1986-1997 Ford Aerostar (1st Gen) uses a 5X114.3 bolt pattern and a 70.6 mm center bore.

What size wheels came on the 1986-1997 Ford Aerostar from the factory?

Factory sizes: 14x5.5 +20; 14x6 +10; 15x7 +12; 16x6 +20.

What lug thread size does the 1986-1997 Ford Aerostar use?

Its wheel fasteners use a 1/2"-20UNF thread.

What aftermarket wheel sizes fit the 1986-1997 Ford Aerostar without modifications?

Bolt-on sizes run from 14" to 16" in diameter; see the size table for the offset range at each width.