Bolt pattern, center bore, factory wheel sizes for each submodel and the aftermarket widths and offsets that bolt on to the Ford C-Max built from 2013 to 2018 (SE, SEL, Titanium, Energi).
Every 2013-2018 Ford C-Max uses a 5X108 bolt pattern with a 63.4 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 63.4 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M12x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.
US-market submodels of the Ford C-Max (C344) and the model years each was sold. All of them share the 5X108 bolt pattern.
| Submodel | Years | Factory wheel sizes |
|---|---|---|
| SE | 2013-2018 | See factory sizes below |
| SEL | 2013-2016 | See factory sizes below |
| Titanium | 2017-2018 | See factory sizes below |
| Energi | 2013-2018 | 17x7 +55 |
Wheel sizes Ford fitted to the 2013-2018 Ford C-Max from the factory (all submodels; the table above lists them by submodel). Offsets are ET in millimeters.
| Factory size |
|---|
| 17x7 +55 |
Widths and offsets with Verified Fitment on the 2013-2018 Ford C-Max: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.
| Diameter | Width | Offset range |
|---|---|---|
| 16-18" | 7" | +38 to +60 |
| 16-18" | 7.5" | +44 to +54 |
Wider still: 16x8.5 +36 to +47; 17x8.5 +36 to +47; 18x8.5 +36 to +47 fit with modifications (roll front and rear fender lips, front camber bolts for added negative camber, trim front fender liner if it rubs at full lock).
| Diameter | Width | Offset range |
|---|---|---|
| 17-18" | 7" | +38 to +60 |
| 17-18" | 7.5" | +44 to +54 |
Wider still: 17x8.5 +36 to +47; 18x8.5 +36 to +47 fit with modifications (roll front and rear fender lips, front camber bolts for added negative camber, trim front fender liner if it rubs at full lock).
The 2013-2018 Ford C-Max (C344) uses a 5X108 bolt pattern and a 63.4 mm center bore.
Factory sizes: 17x7 +55.
Its wheel fasteners use a M12x1.5 thread.
Bolt-on sizes run from 16" to 18" in diameter; see the size table for the offset range at each width.