Ford Escape (C520) 2013-2019 Wheel Fitment Guide

Bolt pattern, center bore, factory wheel sizes for each submodel and the aftermarket widths and offsets that bolt on to the Ford Escape built from 2013 to 2019 (S, SE, SEL, Titanium).

Fitment specs

Bolt pattern5X108
Center bore63.4 mm
Lug threadM12x1.5
Model years2013-2019
GenerationC520

Every 2013-2019 Ford Escape uses a 5X108 bolt pattern with a 63.4 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 63.4 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M12x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.

Years & submodels

US-market submodels of the Ford Escape (C520) and the model years each was sold. All of them share the 5X108 bolt pattern.

SubmodelYearsFactory wheel sizes
S2013-201917x7.5 +52
17x7.5 +52.5
SE2013-201917x7.5 +52
17x7.5 +52.5
SEL2013-201618x7.5 +52
Titanium2013-201918x7.5 +52
18x7.5 +52.5

Factory wheel sizes

Wheel sizes Ford fitted to the 2013-2019 Ford Escape from the factory (all submodels; the table above lists them by submodel). Offsets are ET in millimeters.

Factory size
17x7.5 +52
18x7.5 +52
19x8 +52

Aftermarket sizes that bolt on

Widths and offsets with Verified Fitment on the 2013-2019 Ford Escape: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.

S, SE

DiameterWidthOffset range
17-21"7.5"+35 to +57
17-21"8"+41 to +51

Wider still: 17x9 +33 to +44; 18x9 +33 to +44; 19x9 +33 to +44; 20x9 +33 to +44; 21x9 +33 to +44 fit with modifications (roll fender lips, trim front fender liner and bumper cover edge, camber correction kit for wider wheels).

SEL, Titanium

DiameterWidthOffset range
18-21"7.5"+35 to +57
18-21"8"+41 to +51

Wider still: 18x9 +33 to +44; 19x9 +33 to +44; 20x9 +33 to +44; 21x9 +33 to +44 fit with modifications (roll fender lips, trim front fender liner and bumper cover edge, camber correction kit for wider wheels).

FAQ

What is the bolt pattern of the 2013-2019 Ford Escape?

The 2013-2019 Ford Escape (C520) uses a 5X108 bolt pattern and a 63.4 mm center bore.

What size wheels came on the 2013-2019 Ford Escape from the factory?

Factory sizes: 17x7.5 +52; 18x7.5 +52; 19x8 +52.

What lug thread size does the 2013-2019 Ford Escape use?

Its wheel fasteners use a M12x1.5 thread.

What aftermarket wheel sizes fit the 2013-2019 Ford Escape without modifications?

Bolt-on sizes run from 17" to 21" in diameter; see the size table for the offset range at each width.