Bolt pattern, center bore, factory wheel sizes for each submodel and the aftermarket widths and offsets that bolt on to the Ford Excursion built from 2000 to 2005 (XLS, XLT, Eddie Bauer, Limited).
Every 2000-2005 Ford Excursion uses a 8X170 bolt pattern with a 124.9 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 124.9 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M14x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.
US-market submodels of the Ford Excursion (1st Gen) and the model years each was sold. All of them share the 8X170 bolt pattern.
| Submodel | Years | Factory wheel sizes |
|---|---|---|
| XLS | 2003-2005 | 16x7 +6.35 |
| XLT | 2000-2005 | 16x7 +6.35 |
| Eddie Bauer | 2003-2005 | 16x7 +6.35 |
| Limited | 2000-2005 | 16x7 +6.35 |
Wheel sizes Ford fitted to the 2000-2005 Ford Excursion from the factory (all submodels; the table above lists them by submodel). Offsets are ET in millimeters.
| Factory size |
|---|
| 16x7 +6.35 |
Widths and offsets with Verified Fitment on the 2000-2005 Ford Excursion: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.
| Diameter | Width | Offset range |
|---|---|---|
| 16-22" | 7" | -11 to +12 |
| 16-22" | 7.5" | -4 to +5 |
Wider still: 16x8.5 -12 to -1; 17x8.5 -12 to -1; 18x8.5 -12 to -1; 19x8.5 -12 to -1; 20x8.5 -12 to -1; 21x8.5 -12 to -1… fit with modifications (leveling kit (2-2.5 in) for larger tires, trim front bumper valance and mud flaps, remove or trim front fender liner at full lock).
The 2000-2005 Ford Excursion (1st Gen) uses a 8X170 bolt pattern and a 124.9 mm center bore.
Factory sizes: 16x7 +6.35.
Its wheel fasteners use a M14x1.5 thread.
Bolt-on sizes run from 16" to 22" in diameter; see the size table for the offset range at each width.