Bolt pattern, center bore, factory wheel sizes and the aftermarket widths and offsets that bolt on to the Ford F-150 SVT Raptor built from 2010 to 2014.
Every 2010-2014 Ford F-150 SVT Raptor uses a 6X135 bolt pattern with a 87.1 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 87.1 mm inner diameter so the wheel centers on the hub instead of the lugs. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.
US-market submodels of the Ford F-150 SVT Raptor (P415) and the model years each was sold. All of them share the 6X135 bolt pattern.
| Submodel | Years |
|---|---|
| SVT Raptor | 2010-2014 |
Wheel sizes Ford fitted to the 2010-2014 Ford F-150 SVT Raptor from the factory. Offsets are ET in millimeters.
| Factory size |
|---|
| 17x8.5 +34 |
Widths and offsets with Verified Fitment on the 2010-2014 Ford F-150 SVT Raptor: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.
| Diameter | Width | Offset range |
|---|---|---|
| 17-20" | 8.5" | +17 to +39 |
| 17-20" | 9" | +23 to +33 |
Wider still: 17x10 +15 to +26; 18x10 +15 to +26; 19x10 +15 to +26; 20x10 +15 to +26 fit with modifications (wider factory track: low offsets rub the front fender flares, trim plastic fender liner at full lock, check upper control arm clearance with low backspacing).
The 2010-2014 Ford F-150 SVT Raptor (P415) uses a 6X135 bolt pattern and a 87.1 mm center bore.
Factory sizes: 17x8.5 +34.
Bolt-on sizes run from 17" to 20" in diameter; see the size table for the offset range at each width.