Bolt pattern, center bore, factory wheel sizes and the aftermarket widths and offsets that bolt on to the Ford F-350 Super Duty built from 2005 to 2007 (XL, XLT, Lariat, King Ranch, Harley-Davidson).
Every 2005-2007 Ford F-350 Super Duty uses a 8X170 bolt pattern with a 124.9 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 124.9 mm inner diameter so the wheel centers on the hub instead of the lugs. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.
US-market submodels of the Ford F-350 Super Duty (1st Gen) and the model years each was sold. All of them share the 8X170 bolt pattern.
| Submodel | Years |
|---|---|
| XL | 2005-2007 |
| XLT | 2005-2007 |
| Lariat | 2005-2007 |
| King Ranch | 2005-2007 |
| Harley-Davidson | 2005-2007 |
Wheel sizes Ford fitted to the 2005-2007 Ford F-350 Super Duty from the factory. Offsets are ET in millimeters.
| Factory size |
|---|
| 18x8 +40 |
| 20x8 +40 |
Widths and offsets with Verified Fitment on the 2005-2007 Ford F-350 Super Duty: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.
| Diameter | Width | Offset range |
|---|---|---|
| 17-22" | 8" | +23 to +45 |
| 17-22" | 8.5" | +29 to +39 |
Wider still: 17x9.5 +21 to +32; 18x9.5 +21 to +32; 19x9.5 +21 to +32; 20x9.5 +21 to +32; 21x9.5 +21 to +32; 22x9.5 +21 to +32 fit with modifications (leveling kit (2-2.5 in) for larger tires, trim front bumper valance and mud flaps, remove or trim front fender liner at full lock).
The 2005-2007 Ford F-350 Super Duty (1st Gen) uses a 8X170 bolt pattern and a 124.9 mm center bore.
Factory sizes: 18x8 +40; 20x8 +40.
Bolt-on sizes run from 17" to 22" in diameter; see the size table for the offset range at each width.