Bolt pattern, center bore, factory wheel sizes and the aftermarket widths and offsets that bolt on to the Ford Festiva built from 1988 to 1993 (L, LX, GL).
Every 1988-1993 Ford Festiva uses a 4X114.3 bolt pattern with a 59.6 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 59.6 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M12x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.
US-market submodels of the Ford Festiva (DA) and the model years each was sold. All of them share the 4X114.3 bolt pattern.
| Submodel | Years |
|---|---|
| L | 1988-1993 |
| LX | 1988-1993 |
| GL | 1988-1993 |
Wheel sizes Ford fitted to the 1988-1993 Ford Festiva from the factory. Offsets are ET in millimeters.
| Factory size |
|---|
| 13x5 +40 |
| 14x5.5 +35 |
Widths and offsets with Verified Fitment on the 1988-1993 Ford Festiva: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.
| Diameter | Width | Offset range |
|---|---|---|
| 12-13" | 4" | +19 to +42 |
| 12-13" | 4.5" | +25 to +35 |
Wider still: 12x5.5 +17 to +28; 13x5.5 +17 to +28 fit with modifications (roll the fender lips, add negative camber (camber bolts or arms), wheel alignment after install).
The 1988-1993 Ford Festiva (DA) uses a 4X114.3 bolt pattern and a 59.6 mm center bore.
Factory sizes: 13x5 +40; 14x5.5 +35.
Its wheel fasteners use a M12x1.5 thread.
Bolt-on sizes run from 12" to 13" in diameter; see the size table for the offset range at each width.