Bolt pattern, center bore, factory wheel sizes and the aftermarket widths and offsets that bolt on to the Ford Fiesta ST built from 2014 to 2019.
Every 2014-2019 Ford Fiesta ST uses a 4X108 bolt pattern with a 63.4 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 63.4 mm inner diameter so the wheel centers on the hub instead of the lugs. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.
US-market submodels of the Ford Fiesta ST and the model years each was sold. All of them share the 4X108 bolt pattern.
| Submodel | Years |
|---|---|
| ST | 2014-2019 |
Wheel sizes Ford fitted to the 2014-2019 Ford Fiesta ST from the factory. Offsets are ET in millimeters.
| Factory size |
|---|
| 15x6 +47.5 |
| 15x6.5 +47.5 |
| 16x6.5 +47.5 |
| 17x7 +47.5 |
| 18x7 +45 |
Widths and offsets with Verified Fitment on the 2014-2019 Ford Fiesta ST: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.
| Diameter | Width | Offset range |
|---|---|---|
| 15-18" | 6" | +18 to +57 |
| 15-18" | 6.5" | +24 to +59 |
| 15-18" | 7" | +30 to +53 |
| 15-18" | 7.5" | +37 to +47 |
Wider still: 15x8.5 +29 to +40; 16x8.5 +29 to +40; 17x8.5 +29 to +40; 18x8.5 +29 to +40 fit with modifications (roll front and rear fender lips, front camber bolts for added negative camber, trim front fender liner if it rubs at full lock).
The 2014-2019 Ford Fiesta ST uses a 4X108 bolt pattern and a 63.4 mm center bore.
Factory sizes: 15x6 +47.5; 15x6.5 +47.5; 16x6.5 +47.5; 17x7 +47.5; 18x7 +45.
Bolt-on sizes run from 15" to 18" in diameter; see the size table for the offset range at each width.