Ford Focus (C170) 2008-2011 Wheel Fitment Guide

Bolt pattern, center bore, factory wheel sizes and the aftermarket widths and offsets that bolt on to the Ford Focus built from 2008 to 2011 (S, SE, SES, SEL).

Fitment specs

Bolt pattern4X108
Center bore63.4 mm
Lug threadM12x1.5
Model years2008-2011
GenerationC170

Every 2008-2011 Ford Focus uses a 4X108 bolt pattern with a 63.4 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 63.4 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M12x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.

Years & submodels

US-market submodels of the Ford Focus (C170) and the model years each was sold. All of them share the 4X108 bolt pattern.

SubmodelYears
S2008-2011
SE2008-2011
SES2008-2011
SEL2010-2011

Factory wheel sizes

Wheel sizes Ford fitted to the 2008-2011 Ford Focus from the factory. Offsets are ET in millimeters.

Factory size
15x6 +52.5
16x6 +52.5
17x7 +49

Aftermarket sizes that bolt on

Widths and offsets with Verified Fitment on the 2008-2011 Ford Focus: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.

DiameterWidthOffset range
15-18"6"+35 to +58
15-18"6.5"+42 to +52

Wider still: 15x7.5 +34 to +45; 16x7.5 +34 to +45; 17x7.5 +34 to +45; 18x7.5 +34 to +45 fit with modifications (roll front and rear fender lips, front camber bolts for added negative camber, trim front fender liner if it rubs at full lock).

FAQ

What is the bolt pattern of the 2008-2011 Ford Focus?

The 2008-2011 Ford Focus (C170) uses a 4X108 bolt pattern and a 63.4 mm center bore.

What size wheels came on the 2008-2011 Ford Focus from the factory?

Factory sizes: 15x6 +52.5; 16x6 +52.5; 17x7 +49.

What lug thread size does the 2008-2011 Ford Focus use?

Its wheel fasteners use a M12x1.5 thread.

What aftermarket wheel sizes fit the 2008-2011 Ford Focus without modifications?

Bolt-on sizes run from 15" to 18" in diameter; see the size table for the offset range at each width.