Ford Focus RS (Mk3) 2016-2018 Wheel Fitment Guide

Bolt pattern, center bore, factory wheel sizes and the aftermarket widths and offsets that bolt on to the Ford Focus RS built from 2016 to 2018 (RS, RS Limited).

Fitment specs

Bolt pattern5X108
Center bore63.4 mm
Model years2016-2018
GenerationMk3

Every 2016-2018 Ford Focus RS uses a 5X108 bolt pattern with a 63.4 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 63.4 mm inner diameter so the wheel centers on the hub instead of the lugs. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.

Years & submodels

US-market submodels of the Ford Focus RS (Mk3) and the model years each was sold. All of them share the 5X108 bolt pattern.

SubmodelYears
RS2016-2018
RS Limited2018

Factory wheel sizes

Wheel sizes Ford fitted to the 2016-2018 Ford Focus RS from the factory. Offsets are ET in millimeters.

Factory size
18x7.5 +50
19x8 +50

Aftermarket sizes that bolt on

Widths and offsets with Verified Fitment on the 2016-2018 Ford Focus RS: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.

DiameterWidthOffset range
19"8"+33 to +55
19"8.5"+39 to +49

Wider still: 19x9.5 +31 to +42 fit with modifications (roll front and rear fender lips, front camber bolts for added negative camber, trim front fender liner if it rubs at full lock).

Wheels in stock that fit

In-stock PG WHEELS sets in sizes with Verified Fitment for the 2016-2018 Ford Focus RS. Each card shows only the sizes that fit; prices are for a set of 4 with free shipping in the lower 48.

Modifications Required (roll front and rear fender lips, front camber bolts for added negative camber, trim front fender liner if it rubs at full lock)

FAQ

What is the bolt pattern of the 2016-2018 Ford Focus RS?

The 2016-2018 Ford Focus RS (Mk3) uses a 5X108 bolt pattern and a 63.4 mm center bore.

What size wheels came on the 2016-2018 Ford Focus RS from the factory?

Factory sizes: 18x7.5 +50; 19x8 +50.

What aftermarket wheel sizes fit the 2016-2018 Ford Focus RS without modifications?

Bolt-on sizes run from 19" to 19" in diameter; see the size table for the offset range at each width.