Bolt pattern, center bore, factory wheel sizes for each submodel and the aftermarket widths and offsets that bolt on to the Ford Freestar built from 2004 to 2007 (S, SE, SEL, Limited).
Every 2004-2007 Ford Freestar uses a 5X114.3 bolt pattern with a 63.4 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 63.4 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is 1/2"-20UNF. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.
US-market submodels of the Ford Freestar and the model years each was sold. All of them share the 5X114.3 bolt pattern.
| Submodel | Years | Factory wheel sizes |
|---|---|---|
| S | 2004-2007 | 16x6.5 +44 16x7 +44 |
| SE | 2004-2007 | 16x6.5 +44 16x7 +44 |
| SEL | 2004-2007 | 16x7 +44 |
| Limited | 2004-2007 | 16x7 +44 |
Wheel sizes Ford fitted to the 2004-2007 Ford Freestar from the factory (all submodels; the table above lists them by submodel). Offsets are ET in millimeters.
| Factory size |
|---|
| 16x6.5 +44 |
| 16x7 +44 |
| 17x7 +44 |
| 17x7.5 +40 |
Widths and offsets with Verified Fitment on the 2004-2007 Ford Freestar: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.
| Diameter | Width | Offset range |
|---|---|---|
| 16-17" | 6.5" | +27 to +49 |
| 16-17" | 7" | +33 to +43 |
Wider still: 16x8 +25 to +36; 17x8 +25 to +36 fit with modifications (hub-centric rings for aftermarket bores, roll fender lips, check caliper and suspension clearance on wider wheels).
| Diameter | Width | Offset range |
|---|---|---|
| 16-17" | 7" | +33 to +44 |
Wider still: 16x8 +25 to +36; 17x8 +25 to +36 fit with modifications (hub-centric rings for aftermarket bores, roll fender lips, check caliper and suspension clearance on wider wheels).
In-stock PG WHEELS sets in sizes with Verified Fitment for the 2004-2007 Ford Freestar. Each card shows only the sizes that fit; prices are for a set of 4 with free shipping in the lower 48.
Modifications Required (hub-centric rings for aftermarket bores, roll fender lips, check caliper and suspension clearance on wider wheels)
Modifications Required (hub-centric rings for aftermarket bores, roll fender lips, check caliper and suspension clearance on wider wheels)
The 2004-2007 Ford Freestar uses a 5X114.3 bolt pattern and a 63.4 mm center bore.
Factory sizes: 16x6.5 +44; 16x7 +44; 17x7 +44; 17x7.5 +40.
Its wheel fasteners use a 1/2"-20UNF thread.
Bolt-on sizes run from 16" to 17" in diameter; see the size table for the offset range at each width.