Ford Mustang Mach-E (CX727) 2021-2026 Wheel Fitment Guide

Bolt pattern, center bore, factory wheel sizes for each submodel and the aftermarket widths and offsets that bolt on to the Ford Mustang Mach-E built from 2021 to 2026 (Select, California Route 1, Premium, GT, GT Performance Edition, Rally).

Fitment specs

Bolt pattern5X108
Center bore63.4 mm
Lug threadM14x1.5
Model years2021-2026
GenerationCX727

Every 2021-2026 Ford Mustang Mach-E uses a 5X108 bolt pattern with a 63.4 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 63.4 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M14x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.

Years & submodels

US-market submodels of the Ford Mustang Mach-E (CX727) and the model years each was sold. All of them share the 5X108 bolt pattern.

SubmodelYearsFactory wheel sizes
Select2021-202618x7 +47
19x7 +47
19x7.5 +46
California Route 12021-202318x7 +47
Premium2021-202619x7 +47
19x7.5 +46
GT2021-202620x8 +47
20x8.5 +46
GT Performance Edition2021-2023See factory sizes below
Rally2024-202619x7 +47
19x7.5 +46
19x8 +46

Factory wheel sizes

Wheel sizes Ford fitted to the 2021-2026 Ford Mustang Mach-E from the factory (all submodels; the table above lists them by submodel). Offsets are ET in millimeters.

Factory size
18x7 +47
19x7 +47
19x7.5 +46
19x8 +46
20x8 +47
20x8.5 +46
21x8 +46
21x8.5 +46

Aftermarket sizes that bolt on

Widths and offsets with Verified Fitment on the 2021-2026 Ford Mustang Mach-E: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.

Select, California Route 1, GT Performance Edition

DiameterWidthOffset range
18-22"7"+17 to +57
18-22"7.5"+24 to +59
18-22"8"+30 to +52
18-22"8.5"+36 to +46

Wider still: 18x9.5 +28 to +39; 19x9.5 +28 to +39; 20x9.5 +28 to +39; 21x9.5 +28 to +39; 22x9.5 +28 to +39 fit with modifications (roll fender lips, trim front fender liner and bumper cover edge, camber correction kit for wider wheels).

Premium, Rally

DiameterWidthOffset range
19-22"7"+17 to +57
19-22"7.5"+24 to +59
19-22"8"+30 to +52
19-22"8.5"+36 to +46

Wider still: 19x9.5 +28 to +39; 20x9.5 +28 to +39; 21x9.5 +28 to +39; 22x9.5 +28 to +39 fit with modifications (roll fender lips, trim front fender liner and bumper cover edge, camber correction kit for wider wheels).

GT

DiameterWidthOffset range
20-22"8"+30 to +52
20-22"8.5"+36 to +46

Wider still: 20x9.5 +28 to +39; 21x9.5 +28 to +39; 22x9.5 +28 to +39 fit with modifications (roll fender lips, trim front fender liner and bumper cover edge, camber correction kit for wider wheels).

Wheels in stock that fit

In-stock PG WHEELS sets in sizes with Verified Fitment for the 2021-2026 Ford Mustang Mach-E. Each card shows only the sizes that fit; prices are for a set of 4 with free shipping in the lower 48.

Select, California Route 1, GT Performance Edition

Modifications Required (roll fender lips, trim front fender liner and bumper cover edge, camber correction kit for wider wheels)

Premium, Rally

Modifications Required (roll fender lips, trim front fender liner and bumper cover edge, camber correction kit for wider wheels)

FAQ

What is the bolt pattern of the 2021-2026 Ford Mustang Mach-E?

The 2021-2026 Ford Mustang Mach-E (CX727) uses a 5X108 bolt pattern and a 63.4 mm center bore.

What size wheels came on the 2021-2026 Ford Mustang Mach-E from the factory?

Factory sizes: 18x7 +47; 19x7 +47; 19x7.5 +46; 19x8 +46; 20x8 +47; 20x8.5 +46; 21x8 +46; 21x8.5 +46.

What lug thread size does the 2021-2026 Ford Mustang Mach-E use?

Its wheel fasteners use a M14x1.5 thread.

What aftermarket wheel sizes fit the 2021-2026 Ford Mustang Mach-E without modifications?

Bolt-on sizes run from 18" to 22" in diameter; see the size table for the offset range at each width.