Bolt pattern, center bore, factory wheel sizes and the aftermarket widths and offsets that bolt on to the Ford Mustang SVT Cobra built from 1993 to 1993 (SVT Cobra, SVT Cobra R).
Every 1993 Ford Mustang SVT Cobra uses a 4X108 bolt pattern with a 63.4 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 63.4 mm inner diameter so the wheel centers on the hub instead of the lugs. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.
US-market submodels of the Ford Mustang SVT Cobra (Fox) and the model years each was sold. All of them share the 4X108 bolt pattern.
| Submodel | Years |
|---|---|
| SVT Cobra | 1993 |
| SVT Cobra R | 1993 |
Wheel sizes Ford fitted to the 1993 Ford Mustang SVT Cobra from the factory. Offsets are ET in millimeters.
| Factory size |
|---|
| 16x7 +22.4 |
| 16x7.5 +20 |
| 17x8 +20 |
Widths and offsets with Verified Fitment on the 1993 Ford Mustang SVT Cobra: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.
| Diameter | Width | Offset range |
|---|---|---|
| 16-18" | 7" | +5 to +28 |
| 16-18" | 7.5" | +12 to +21 |
Wider still: 16x8.5 +4 to +15; 17x8.5 +4 to +15; 18x8.5 +4 to +15 fit with modifications (roll rear fender lips, front camber plates or bolts for -1° or more, check strut and spring perch clearance (thin spacer if needed)).
The 1993 Ford Mustang SVT Cobra (Fox) uses a 4X108 bolt pattern and a 63.4 mm center bore.
Factory sizes: 16x7 +22.4; 16x7.5 +20; 17x8 +20.
Bolt-on sizes run from 16" to 18" in diameter; see the size table for the offset range at each width.