Ford Ranger (P703) 2024-2026 Wheel Fitment Guide

Bolt pattern, center bore, factory wheel sizes for each submodel and the aftermarket widths and offsets that bolt on to the Ford Ranger built from 2024 to 2026 (XL, XLT, Lariat, Raptor).

Fitment specs

Bolt pattern6X139.7
Center bore93.1 mm
Lug threadM12x1.5
Model years2024-2026
GenerationP703

Every 2024-2026 Ford Ranger uses a 6X139.7 bolt pattern with a 93.1 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 93.1 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M12x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.

Years & submodels

US-market submodels of the Ford Ranger (P703) and the model years each was sold. All of them share the 6X139.7 bolt pattern.

SubmodelYearsFactory wheel sizes
XL2024-202617x7.5 +55
XLT2024-202617x7.5 +55
Lariat2024-202618x7.5 +55
18x8 +55
Raptor2024-202617x7.5 +55

Factory wheel sizes

Wheel sizes Ford fitted to the 2024-2026 Ford Ranger from the factory (all submodels; the table above lists them by submodel). Offsets are ET in millimeters.

Factory size
17x7.5 +55
17x8 +55
18x7.5 +55
18x8 +55
19x8 +55
20x8 +55
21x8.5 +55

Aftermarket sizes that bolt on

Widths and offsets with Verified Fitment on the 2024-2026 Ford Ranger: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.

XL, XLT, Raptor

DiameterWidthOffset range
17-19"7.5"+38 to +60
17-19"8"+44 to +54

Wider still: 17x9 +36 to +47; 18x9 +36 to +47; 19x9 +36 to +47 fit with modifications (leveling kit (about 1.5-2 in) for larger tires, trim front fender liner and air dam / mud flaps, check upper control arm clearance with low backspacing).

Lariat

DiameterWidthOffset range
18-19"7.5"+38 to +60
18-19"8"+44 to +54

Wider still: 18x9 +36 to +47; 19x9 +36 to +47 fit with modifications (leveling kit (about 1.5-2 in) for larger tires, trim front fender liner and air dam / mud flaps, check upper control arm clearance with low backspacing).

FAQ

What is the bolt pattern of the 2024-2026 Ford Ranger?

The 2024-2026 Ford Ranger (P703) uses a 6X139.7 bolt pattern and a 93.1 mm center bore.

What size wheels came on the 2024-2026 Ford Ranger from the factory?

Factory sizes: 17x7.5 +55; 17x8 +55; 18x7.5 +55; 18x8 +55; 19x8 +55; 20x8 +55; 21x8.5 +55.

What lug thread size does the 2024-2026 Ford Ranger use?

Its wheel fasteners use a M12x1.5 thread.

What aftermarket wheel sizes fit the 2024-2026 Ford Ranger without modifications?

Bolt-on sizes run from 17" to 19" in diameter; see the size table for the offset range at each width.