Ford Tempo 2nd Gen 1988-1994 Wheel Fitment Guide

Bolt pattern, center bore, factory wheel sizes and the aftermarket widths and offsets that bolt on to the Ford Tempo built from 1988 to 1994 (GL, GLX, LX, All Wheel Drive, GLS).

Fitment specs

Bolt pattern4X108
Center bore63.4 mm
Model years1988-1994
Generation2nd Gen

Every 1988-1994 Ford Tempo uses a 4X108 bolt pattern with a 63.4 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 63.4 mm inner diameter so the wheel centers on the hub instead of the lugs. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.

Years & submodels

US-market submodels of the Ford Tempo (2nd Gen) and the model years each was sold. All of them share the 4X108 bolt pattern.

SubmodelYears
GL1988-1994
GLX1988-1991
LX1988-1994
All Wheel Drive1988-1991
GLS1988-1992

Factory wheel sizes

Wheel sizes Ford fitted to the 1988-1994 Ford Tempo from the factory. Offsets are ET in millimeters.

Factory size
13x4.5 +41

Aftermarket sizes that bolt on

Widths and offsets with Verified Fitment on the 1988-1994 Ford Tempo: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.

DiameterWidthOffset range
13-14"4.5"+24 to +46
13-14"5"+30 to +40

Wider still: 13x6 +22 to +33; 14x6 +22 to +33 fit with modifications (roll front and rear fender lips, front camber bolts for added negative camber, trim front fender liner if it rubs at full lock).

FAQ

What is the bolt pattern of the 1988-1994 Ford Tempo?

The 1988-1994 Ford Tempo (2nd Gen) uses a 4X108 bolt pattern and a 63.4 mm center bore.

What size wheels came on the 1988-1994 Ford Tempo from the factory?

Factory sizes: 13x4.5 +41.

What aftermarket wheel sizes fit the 1988-1994 Ford Tempo without modifications?

Bolt-on sizes run from 13" to 14" in diameter; see the size table for the offset range at each width.