GMC Acadia 3rd Gen 2024-2026 Wheel Fitment Guide

Bolt pattern, center bore, factory wheel sizes for each submodel and the aftermarket widths and offsets that bolt on to the GMC Acadia built from 2024 to 2026 (AT4, Denali, Elevation, Denali Ultimate).

Fitment specs

Bolt pattern6X120
Center bore66.9 mm
Lug threadM14x1.5
Model years2024-2026
Generation3rd Gen

Every 2024-2026 GMC Acadia uses a 6X120 bolt pattern with a 66.9 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 66.9 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M14x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.

Years & submodels

US-market submodels of the GMC Acadia (3rd Gen) and the model years each was sold. All of them share the 6X120 bolt pattern.

SubmodelYearsFactory wheel sizes
AT42024-202618x8 +50
Denali2024-202620x8 +50
Elevation2024-202620x8 +50
Denali Ultimate202622x8.5 +50

Factory wheel sizes

Wheel sizes GMC fitted to the 2024-2026 GMC Acadia from the factory (all submodels; the table above lists them by submodel). Offsets are ET in millimeters.

Factory size
18x8 +50
20x8 +50
22x8.5 +50

Aftermarket sizes that bolt on

Widths and offsets with Verified Fitment on the 2024-2026 GMC Acadia: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.

AT4

DiameterWidthOffset range
18-22"8"+33 to +55
18-22"8.5"+39 to +49

Wider still: 18x9.5 +31 to +42; 19x9.5 +31 to +42; 20x9.5 +31 to +42; 21x9.5 +31 to +42; 22x9.5 +31 to +42 fit with modifications (roll fender lips, trim the plastic inner fender liner, hub-centric rings for aftermarket wheels).

Denali, Elevation

DiameterWidthOffset range
20-22"8"+33 to +55
20-22"8.5"+39 to +49

Wider still: 20x9.5 +31 to +42; 21x9.5 +31 to +42; 22x9.5 +31 to +42 fit with modifications (roll fender lips, trim the plastic inner fender liner, hub-centric rings for aftermarket wheels).

Denali Ultimate

DiameterWidthOffset range
22"8.5"+39 to +50

Wider still: 22x9.5 +31 to +42 fit with modifications (roll fender lips, trim the plastic inner fender liner, hub-centric rings for aftermarket wheels).

FAQ

What is the bolt pattern of the 2024-2026 GMC Acadia?

The 2024-2026 GMC Acadia (3rd Gen) uses a 6X120 bolt pattern and a 66.9 mm center bore.

What size wheels came on the 2024-2026 GMC Acadia from the factory?

Factory sizes: 18x8 +50; 20x8 +50; 22x8.5 +50.

What lug thread size does the 2024-2026 GMC Acadia use?

Its wheel fasteners use a M14x1.5 thread.

What aftermarket wheel sizes fit the 2024-2026 GMC Acadia without modifications?

Bolt-on sizes run from 18" to 22" in diameter; see the size table for the offset range at each width.