Bolt pattern, center bore, factory wheel sizes and the aftermarket widths and offsets that bolt on to the GMC Envoy built from 2002 to 2009 (SLE, SLT, Denali).
Every 2002-2009 GMC Envoy uses a 6X127 bolt pattern with a 78.1 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 78.1 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M12x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.
US-market submodels of the GMC Envoy (GMT360) and the model years each was sold. All of them share the 6X127 bolt pattern.
| Submodel | Years |
|---|---|
| SLE | 2002-2009 |
| SLT | 2002-2009 |
| Denali | 2005-2009 |
Wheel sizes GMC fitted to the 2002-2009 GMC Envoy from the factory. Offsets are ET in millimeters.
| Factory size |
|---|
| 17x7 +50 |
| 18x7.5 +45 |
| 18x7.5 +48 |
| 18x7.5 +50 |
| 18x8 +40 |
| 18x8 +45 |
Widths and offsets with Verified Fitment on the 2002-2009 GMC Envoy: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.
| Diameter | Width | Offset range |
|---|---|---|
| 16-20" | 7" | +33 to +55 |
| 16-20" | 7.5" | +39 to +49 |
Wider still: 16x8.5 +31 to +42; 17x8.5 +31 to +42; 18x8.5 +31 to +42; 19x8.5 +31 to +42; 20x8.5 +31 to +42 fit with modifications (front leveling kit for larger tires, trim front bumper valance and inner fender liner, upper control arms for 2in+ lift).
The 2002-2009 GMC Envoy (GMT360) uses a 6X127 bolt pattern and a 78.1 mm center bore.
Factory sizes: 17x7 +50; 18x7.5 +45; 18x7.5 +48; 18x7.5 +50; 18x8 +40; 18x8 +45.
Its wheel fasteners use a M12x1.5 thread.
Bolt-on sizes run from 16" to 20" in diameter; see the size table for the offset range at each width.