Bolt pattern, center bore, factory wheel sizes and the aftermarket widths and offsets that bolt on to the GMC Savana 1500 built from 1996 to 2002.
Every 1996-2002 GMC Savana 1500 uses a 5X127 bolt pattern with a 78.3 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 78.3 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M14x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.
US-market submodels of the GMC Savana 1500 (GMT600) and the model years each was sold. All of them share the 5X127 bolt pattern.
| Submodel | Years |
|---|---|
| 1500 | 1996-2002 |
Wheel sizes GMC fitted to the 1996-2002 GMC Savana 1500 from the factory. Offsets are ET in millimeters.
| Factory size |
|---|
| 15x6 +12 |
| 15x7 +12 |
| 16x7 +10 |
| 16x7.5 +5 |
| 17x7 +10 |
| 17x7.5 +5 |
| 18x7.5 +5 |
| 18x8 +0 |
Widths and offsets with Verified Fitment on the 1996-2002 GMC Savana 1500: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.
| Diameter | Width | Offset range |
|---|---|---|
| 15-17" | 6" | -5 to +17 |
| 15-17" | 6.5" | +1 to +11 |
Wider still: 15x7.5 -7 to +4; 16x7.5 -7 to +4; 17x7.5 -7 to +4 fit with modifications (trim front inner fender liner, hub-centric rings for aftermarket wheels).
The 1996-2002 GMC Savana 1500 (GMT600) uses a 5X127 bolt pattern and a 78.3 mm center bore.
Factory sizes: 15x6 +12; 15x7 +12; 16x7 +10; 16x7.5 +5; 17x7 +10; 17x7.5 +5; 18x7.5 +5; 18x8 +0.
Its wheel fasteners use a M14x1.5 thread.
Bolt-on sizes run from 15" to 17" in diameter; see the size table for the offset range at each width.