GMC Yukon (GMT800) 2000 Wheel Fitment Guide

Bolt pattern, center bore, factory wheel sizes for each submodel and the aftermarket widths and offsets that bolt on to the GMC Yukon built from 2000 to 2000 (SLE, SLT, Denali).

Fitment specs

Bolt pattern6X139.7
Center bore78.1 mm
Lug threadM14x1.5
Model years2000
GenerationGMT800

Every 2000 GMC Yukon uses a 6X139.7 bolt pattern with a 78.1 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 78.1 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M14x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.

Years & submodels

US-market submodels of the GMC Yukon (GMT800) and the model years each was sold. All of them share the 6X139.7 bolt pattern.

SubmodelYearsFactory wheel sizes
SLE2000See factory sizes below
SLT2000See factory sizes below
Denali200016x7 +31

Factory wheel sizes

Wheel sizes GMC fitted to the 2000 GMC Yukon from the factory (all submodels; the table above lists them by submodel). Offsets are ET in millimeters.

Factory size
16x6.5 +31
16x7 +31
17x7.5 +31

Aftermarket sizes that bolt on

Widths and offsets with Verified Fitment on the 2000 GMC Yukon: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.

SLE, SLT

DiameterWidthOffset range
15-20"6.5"+14 to +41
15-20"7"+20 to +47
15-20"7.5"+27 to +43
15-20"8"+33 to +37

Wider still: 15x8.5 +19 to +36; 15x9 +25 to +30; 16x8.5 +19 to +36; 16x9 +25 to +30; 17x8.5 +19 to +36; 17x9 +25 to +30… fit with modifications (torsion-bar / front leveling for larger tires (4wd), trim front bumper valance and inner fender liner, hub-centric rings for aftermarket wheels).

Denali

DiameterWidthOffset range
16-20"7"+20 to +41
16-20"7.5"+27 to +43
16-20"8"+33 to +37

Wider still: 16x8.5 +19 to +36; 16x9 +25 to +30; 17x8.5 +19 to +36; 17x9 +25 to +30; 18x8.5 +19 to +36; 18x9 +25 to +30… fit with modifications (torsion-bar / front leveling for larger tires (4wd), trim front bumper valance and inner fender liner, hub-centric rings for aftermarket wheels).

Wheels in stock that fit

In-stock PG WHEELS sets in sizes with Verified Fitment for the 2000 GMC Yukon. Each card shows only the sizes that fit; prices are for a set of 4 with free shipping in the lower 48.

SLE, SLT

Modifications Required (torsion-bar / front leveling for larger tires (4wd), trim front bumper valance and inner fender liner, hub-centric rings for aftermarket wheels)

Denali

Modifications Required (torsion-bar / front leveling for larger tires (4wd), trim front bumper valance and inner fender liner, hub-centric rings for aftermarket wheels)

FAQ

What is the bolt pattern of the 2000 GMC Yukon?

The 2000 GMC Yukon (GMT800) uses a 6X139.7 bolt pattern and a 78.1 mm center bore.

What size wheels came on the 2000 GMC Yukon from the factory?

Factory sizes: 16x6.5 +31; 16x7 +31; 17x7.5 +31.

What lug thread size does the 2000 GMC Yukon use?

Its wheel fasteners use a M14x1.5 thread.

What aftermarket wheel sizes fit the 2000 GMC Yukon without modifications?

Bolt-on sizes run from 15" to 20" in diameter; see the size table for the offset range at each width.