Bolt pattern, center bore, factory wheel sizes and the aftermarket widths and offsets that bolt on to the GMC Yukon XL built from 2000 to 2006 (SLE, SLT, Denali).
Every 2000-2006 GMC Yukon XL uses a 6X139.7 bolt pattern with a 78.1 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 78.1 mm inner diameter so the wheel centers on the hub instead of the lugs. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.
US-market submodels of the GMC Yukon XL (GMT800) and the model years each was sold. All of them share the 6X139.7 bolt pattern.
| Submodel | Years |
|---|---|
| SLE | 2000-2006 |
| SLT | 2000-2006 |
| Denali | 2001-2006 |
Wheel sizes GMC fitted to the 2000-2006 GMC Yukon XL from the factory. Offsets are ET in millimeters.
| Factory size |
|---|
| 16x6.5 +31 |
| 16x7 +31 |
| 17x7.5 +31 |
Widths and offsets with Verified Fitment on the 2000-2006 GMC Yukon XL: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.
| Diameter | Width | Offset range |
|---|---|---|
| 16-22" | 7" | +14 to +37 |
| 16-22" | 7.5" | +20 to +30 |
Wider still: 16x8.5 +12 to +23; 17x8.5 +12 to +23; 18x8.5 +12 to +23; 19x8.5 +12 to +23; 20x8.5 +12 to +23; 21x8.5 +12 to +23… fit with modifications (front leveling kit for larger tires, trim front bumper valance and inner fender liner, upper control arms for 2in+ lift).
The 2000-2006 GMC Yukon XL (GMT800) uses a 6X139.7 bolt pattern and a 78.1 mm center bore.
Factory sizes: 16x6.5 +31; 16x7 +31; 17x7.5 +31.
Bolt-on sizes run from 16" to 22" in diameter; see the size table for the offset range at each width.