Honda Accord V6 (CD) 1995-1997 Wheel Fitment Guide

Bolt pattern, center bore, factory wheel sizes and the aftermarket widths and offsets that bolt on to the Honda Accord V6 built from 1995 to 1997 (LX V6, EX V6).

Fitment specs

Bolt pattern4X114.3
Center bore64.1 mm
Model years1995-1997
GenerationCD

Every 1995-1997 Honda Accord V6 uses a 4X114.3 bolt pattern with a 64.1 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 64.1 mm inner diameter so the wheel centers on the hub instead of the lugs. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.

Years & submodels

US-market submodels of the Honda Accord V6 (CD) and the model years each was sold. All of them share the 4X114.3 bolt pattern.

SubmodelYears
LX V61995-1997
EX V61995-1997

Factory wheel sizes

Wheel sizes Honda fitted to the 1995-1997 Honda Accord V6 from the factory. Offsets are ET in millimeters.

Factory size
15x6 +55

Aftermarket sizes that bolt on

Widths and offsets with Verified Fitment on the 1995-1997 Honda Accord V6: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.

DiameterWidthOffset range
15-17"6"+38 to +60
15-17"6.5"+44 to +54

Wider still: 15x7.5 +36 to +47; 16x7.5 +36 to +47; 17x7.5 +36 to +47 fit with modifications (roll rear fender lips, front camber bolts / rear camber arms for -1.5° or more, hub-centric rings for aftermarket wheels).

FAQ

What is the bolt pattern of the 1995-1997 Honda Accord V6?

The 1995-1997 Honda Accord V6 (CD) uses a 4X114.3 bolt pattern and a 64.1 mm center bore.

What size wheels came on the 1995-1997 Honda Accord V6 from the factory?

Factory sizes: 15x6 +55.

What aftermarket wheel sizes fit the 1995-1997 Honda Accord V6 without modifications?

Bolt-on sizes run from 15" to 17" in diameter; see the size table for the offset range at each width.